The stator winding mainly has inner winding and outer winding. The inner winding often uses the pin winding method, which is more trouble-free and the winding is tighter.

2 Pin Spindles Segmented Teeth Linear Stator Automatic BLDC Brushless Drone Electric Vehicle E Bike Inner Motor Coil Needle Winding Machine

The principle of use of the stator winding machine: the motor pulls the reversing inner wheel and then pulls the small wheel on the transmission shaft. The large wheel can be turned several times by hand. A wire frame is placed on the shaft with a counter. , when the shaft is running, the sensor information displays the number of turns. In this way, the number of turns of the winding wire can be known. If a large coil is wound, the rocker can be put on the drive shaft and the rocker can be turned one turn and one turn. Save effort.

In some cases, when the stator winding machine equipment manufacturer leaves the factory, the equipment has been calibrated, but after it is assembled at the user’s end, various problems occur. The production and processing of the equipment is unstable, and it may be possible that The manufacturer’s own technical level is not very good, or it may be bumped during the entire logistics and transportation process; but in many cases, the direct impact of the indoor environment of the assembly can also cause the stator winding machine to run unstable. What are the actual reasons? Woolen cloth?

1. The temperature and humidity of the assembly room environment are the same as those of winding machines and other mechanical equipment. There are many electronic components on them. If the ambient temperature is high or the humidity is high, it is easy to cause damage to the circuit board. A certain degree of influence, or static electricity, directly affects the stable performance of the machine and equipment. Therefore, before assembly, special attention must be paid to the indoor environment and the assembly should be done in a dry and ventilated place as much as possible.

2. The power supply is unstable and fluctuates greatly, which can easily cause the winding machine equipment to restart repeatedly, which will directly affect the stability of the equipment and make it difficult to use. The power supply voltage can be well protected to ensure Production and processing are stable.

3. Static electricity has a great direct impact on mechanical equipment, so grounding devices must be installed.

Vacuz High Precision Inner Outer BLDC Brushless Drone Stator Motor Coil Needle Fly Fork Winding Machine

WhatsApp/Wechat: +86 13075286997

E-mail: sales@vacuz.com