Was ist der Grund für die unordentliche Statorwicklungsreihe eines bürstenlosen Motors? Was sind die Lösungen?

For the brushless motor stator winding line, generally have requirements, different customers, different products, general winding requirements are different, some only need ordinary winding can be, some need precision line, but sometimes, precision line often can not meet the requirements, line is not neat, and even also hurt line broken line, then brushless motor stator winding line is not neat what is the reason? What are the solutions, Vacuz will give you an introduction! I hope it can help you!

1. Machine spare parts configuration does not meet the requirements, such as servo motor electric drive quality is not good, the controller is inaccurate, screws, guide rails, cylinders, wire nozzles, wire wheels, tensioners, etc. is not precise enough to meet the hardware requirements of precision wiring.

2. The stability of the machine is worrisome, the chassis, frame and work surface material is not good, stability is not enough, resulting in machine operation shaking, winding line offset.

3. The adjustment of the tensioner does not meet the requirements, the enameled wire is too tight or too loose, according to the requirements of the tension needs to be adjusted to the appropriate, to ensure that the tension balance of the winding.

4. The debugging of the winding machine does not meet the requirements, the technicians do not have enough experience in debugging, resulting in the winding is not neat, not up to the standard of precision line.

Precision wire requirements line neat and disorderly, not only from the configuration and stability of the machine to start, but also pay attention to the debugging skills, only if the conditions are in place to ensure that the line is wound neatly.

WhatsApp/Wechat: +86 13075286997

E-Mail: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="small-visibility,medium-visibility,large-visibility" class="" id=""][/fusion_form]