Can a motor stator coil winding machine be overloaded in use?

A coil winder is a machine and equipment used to wind lead wires, coils, etc. When using a coil winder, you need to pay attention to the power rating and load capacity of the coil winder in order to avoid overloading it.

Overloading the winding machine may lead to the following problems:

1. Motor overheating: If the winding machine is overloaded, the motor will produce too much heat due to excessive operation, resulting in overheating of the motor, which in turn affects the normal work of the winding machine.

2. Bearing wear: The operation of the winding machine under overload will lead to increased wear and tear of the bearings, bearing failure, which in turn will lead to damage to the machine.

3. Equipment failure: If the winding machine is overloaded, the equipment may fail, such as motor stalling, broken wires and other problems, resulting in the machine can not work properly.

In order to avoid overloading the winding machine, we should pay attention to the following points:

1. Confirm the rated power and load capacity of the winding machine to avoid overloading.

2. When using the winding machine, you should follow the operating procedures to avoid overloading the machine for a short period of time.

3. Regular maintenance of the winding machine, to maintain the normal operating condition of the machine, to reduce the occurrence of machine failure.

We should pay attention to the normal use of the machine, avoid overload, ensure the normal operation of the machine, improve productivity.

To ensure the normal operation of a winding machine, daily inspection and correct operation is an important and indispensable step, first of all, should establish a manual of equipment for daily record and access to read the operation of the winding machine and the existence of the problem, start working to carefully check the workbench, row of guide rails and the main sliding surface, such as obstacles, tools, impurities, etc., must be cleaned up, wiped clean, oiled, and carefully viewed! Equipment mobile institutions have no new pull, research, bruises, such as equipment should be notified to view the analysis of whether the failure is due to, and make a record, check the safety protection, power supply, limit and other devices should be complete and intact, check the electrical distribution box should be closed securely, electrical grounding is good, check whether the equipment is good accessories. Over the wire wheel, felt clip, wire release, ceramic parts should be complete and intact, installed correctly, idle running test run to observe whether the operation is smooth, there is no abnormal noise and so on.

WhatsApp/Wechat: +86 13075286997

E-Mail: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="small-visibility,medium-visibility,large-visibility" class="" id=""][/fusion_form]