Internal winding machine is more widely used, often applied to garden tool motors, power tool motors, small water pump motors, high-speed air blower motors, vacuum cleaner motors and other stator products winding, for high-speed internal winding machine, how to do a good job of maintenance? What are the details of daily maintenance? The following Vacuz simple to introduce it! I hope it can help you!

High-speed internal winding machine maintenance is to ensure its efficient and stable operation of the key. The following are some detailed steps and precautions for daily maintenance:

First, cleaning and maintenance:

1. Regularly clean the surface of the winding machine, using a soft cloth and the appropriate cleaning agent, and avoid the use of excessive moisture to prevent adverse effects on the machine.

2. Pay special attention to the parts that are easy to accumulate dust, such as the motor and conveyor wheels, etc. Use a hair dryer or vacuum cleaner to clean up dust inside and outside.

3. Use a brush or other tools to remove dust from the wire bracket, air pressure gauge, wire pressure pulleys and other places.

Second, circuit line check:

1. Check whether all power supply lines use reliable grounding wires to ensure the safety of the equipment.

2. Check that all wires, cables, plugs and head connectors are intact. If any damage or wear is found, it should be replaced in time.

3. Test the circuit connections with a multimeter or other tools to ensure that the circuit connections are normal.

C. Transmission system check:

1. Check the transmission system for looseness with a wrench or other tool and tighten it.

2. Check the lubrication of the transmission system and add or replace the lubricant regularly.

IV.Electrical system check:

1. Check whether the power switch is normal, whether the grounding of the equipment is good, whether the cable is damaged and whether the connector is loose.

2. Check whether the lubrication of the reducer is normal, whether the reduction ratio of the reducer is appropriate, and whether the noise of the reducer is normal.

V. Lubrication maintenance:

1. Choose suitable lubricant to lubricate the equipment and adjust it according to the frequency of use and working environment of the equipment.

2. Regularly check the oil level and quality of the lubricant and add or replace it in time.

Sixth, other precautions:

1. Regularly check the various parts of the equipment, such as coil holders, upper and lower copper nozzles, pressure wire wheels, tension wire wheels, etc., to ensure their normal operation.

2. Regularly calibrate and debug the equipment to ensure its accuracy and stability.

3. Pay attention to the storage and custody of equipment to avoid damage caused by improper storage methods.

4. Record the maintenance history and faults of the equipment so that problems can be identified and dealt with in a timely manner.

How to do a good job of maintenance of high-speed internal winding machine? What are the details of daily maintenance?Vacuz above is a common maintenance method, I hope these tips can help you!

Ηλεκτρονικό ταχυδρομείο: sales@vacuz.com