Why does the automatic motor winding machine make abnormal noises?

Vacuz Big BLDC Estator Automático Sin Escobillas Motor Interior Bobina Aguja Bobinadora Entrega
Vacuz Big BLDC Estator Automático Sin Escobillas Motor Interior Bobina Aguja Bobinadora Entrega

During the winding process, the automatic bobbin winder will hear a very subtle mmmmm sound, which is the normal sound of the winding operation; when the shaft slides, you will hear the scratching sound of the guide rail sliding; and occasionally there will be the sound of the air pump releasing gas. Generally, it’s pleasant and there are no unpleasant sounds. Experienced people can judge whether the winding machine is abnormal through the process sound.

Vacuz doble estaciones automático BLDC sin escobillas drone motor bobina del estator tenedor de vuelo máquina de bobinado y el papel de inserción de embalaje de la máquina
Vacuz doble estaciones automático BLDC sin escobillas drone motor bobina del estator tenedor de vuelo máquina de bobinado y el papel de inserción de embalaje de la máquina

If the screws are not tightened or the parts need to install the screws but the screws are not installed, the inertial impact of the operation of the winding machine parts may lead to loosening of the parts, and in severe cases, impact will occur. Therefore, when you hear the sound of impact, you must block the machinery and quickly check the equipment; If the base of the winding machine is not heavy enough or the floor is not served, the winding machine will have shaking and dada sound during operation; Insufficient lubricant in the bearings, and hissing sound is heard inside the bearing chamber of the winding machine;

Vacuz Dos Estaciones Precisión Servo BLDC Motor sin escobillas E Bike Bobina del estator Flying Fork Bobinadora
Vacuz Dos Estaciones Precisión Servo BLDC Motor sin escobillas E Bike Bobina del estator Flying Fork Bobinadora

The steel ball in the bearing is damaged, there is a gurgling sound during operation; loose rotor parts, such as loose counterweight screws on the cage rotor blades or loose rotor shafts, will cause the winding machine to produce a knocking sound; if the shaft is bent or the bearings are worn out, the winding machine will also vibrate and friction unevenly; wear and tear on the wire varnish leads to the crossing of the two wires, and there will be a nuisance sound, but at that time, it has already resulted in a short-circuit, which will cause serious damage to the electronic parts, so the usual inspection and maintenance is more important than maintenance.

WhatsApp/Wechat: +86 13075286997

Correo electrónico: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]

Correo electrónico: sales@vacuz.com
Consulta Vacuz Now