A. Common problems and solutions for wire loading boxes

Common problems.

1. blockage of the wire crossing hole affects the wire feeding and winding.

2. The four corners of the distribution frame are easy to wrap the wire, forming a broken wire or broken wire maintenance downtime.

Solutions.

1. from time to time to observe, clean the line hole dust, waste, adhere to the line hole unclogged.

2. The wire splitting frame needs to place the enameled wire to the best position when the wire is wound.

Second, the twisted wire set of common problems and solutions

Common problems: 1.

1. twisted wire twist is not tight to form a loose line, the impact of winding unsuccessful.

2. The twisted wire twist line is too long or too short, producing twisted wire or loose wire products.

3. The twisted wire motor does not work or the motor works but does not twist the wire.

Solution.

1. Adjust the flexibility of the twisted wire splint and adjust the position of the starting slot of Urethane.

2. adjust the balance of the taut spring strength, adjust the position of the pressure wire group Ulli glue.

3. check whether the power plug is loose, or poor contact, motor operation but not twisted line, to check whether the motor rotation axis screws are loose or jammed.

Vacuz toodab ja müüb automaatset mähkimismasinat, täppismähkimismasinat, induktori mähkimismasinat ja muid seadmeid, mis on teretulnud konsulteerima ja tellima.

WhatsApp/Wechat: +86 13075286997

E-post: sales@vacuz.com