4/6/7/8 Inches Semi Automatic Differential Mode Toroidal Coil Inductor Side Slider Type Current Transformer Winding Machine

Machine Features

This model adopts a new asynchronous motor dual-frequency converter control system, which is suitable for surrounding thick wire rings. It has good stability, easy operation, few faults, and simple maintenance.

This model uses a new chip, with a maximum capacity of 10,000 step winding data. The storage ring can be replaced according to customer requirements. Permanent after-sales service

A. This model adopts CNC digital brushless control system, which is simple to operate, requires less maintenance, has low faults, has a novel appearance, reasonable structure, and is made of high-quality steel. The machine is lightweight and has good stability.

B. Use brushless drive mode, low noise, the cable is equipped with constant current chopper drive mode, the following is fast and precise, the accessories are branded products, with excellent performance, long service life, and adapt to various working environments.

C. It can pump out and store 1000 steps, and can set the number of turns, outer diameter, inner diameter, height, angle, wire diameter, direction, speed and other parameters. It has functions such as accurate counting, power failure memory, overload and overcurrent protection, and strong anti-interference. .

Main Technical Parameter

Model	4 inches slide winding machine	5 inches slide winding machine	6 inches slide winding machine	7 inches slide winding machine	8 inches slide winding machine
Windable Wire Diameter	0.05-0.25mm	0.06-0.25mm	0.05-0.35mm	0.07-0.5mm	0.07-0.7mm
Min. final coil I. D.	φ6	φ6	φ7	φ10	φ12
Coil O. D.	φ10-30	φ18-30	φ22-60	φ30-60	φ30-80
Max. final coil height	25	30	33	45	50
Spreading motor	24V stepping motor	24V stepping motor	24V stepping motor	24V stepping motor	24V stepping motor
Winding  motor	DC 400W	DC 400W	DC 600W	DC 600W	DC 600W
Max winding speed	2800RPM	2600RPM	2600RPM	2000RPM	2000RPM
Voltage	220V 50/60HZ	220V 50/60HZ	220V 50/60HZ	220V 50/60HZ	220V 50/60HZ
Machine Weight	40KG	40KG	60KG	65KG	65KG
Packing Dimension	900*700*600mm	900*700*600mm	1000*700*600mm	1050*550*700mm	1050*550*700mm
Lead time	15days	15days	15days	15days	15days

Sample Show

Ettevõtte teave

Vacuz Machine Factory asutati 2007. aasta mais ja asub Guangdongi provintsis Dongguani linnas. See on professionaalne tootja, kes tegeleb automaatsete mähkimismasinate, pooli mähkimismasinate, trafo mähkimismasinate, mootori mähkimismasinate, traadita mähkimismasinate, SQ ühise režiimi drossel induktori mähkimismasinate ja muude mittestandardsete mähkimismasinate uurimise, arendamise, tootmise, müügi ja teenindamisega. Meie tooted müüvad hästi kõigis Hiina linnades ja provintsides ning neid eksporditakse ka sellistesse riikidesse ja piirkondadesse nagu Lähis-Ida, Euroopa, Aafrika, Aasia ja Põhja-Ameerika. Olenemata sellest, kas valite praeguse toote meie kataloogist või otsite oma rakenduse jaoks tehnilist abi, võite rääkida oma hankimisvajadustest meie klienditeeninduskeskusega. Kvaliteet on meie kultuur! Loodame teie koostööle varsti!

Pakkimine ja saatmine

1.Port: Shanghai / Shenzhen või teie valik

Pakendamine ja transport
Üldine pakend (paberkarp või kilekott): Pakendage see vormi ja pakkepaberiga, et tagada transpordi ajal purunematus.
Puidust kastipakend: Meil on spetsiaalne kvalifitseeritud puusepp, kes valmistab sobiva puidust kasti täpse paksuse, tiheduse ja pikkusega. Üles nool ↑ märgistatud välimine puust kast. Puffer materjal pannakse puust kastis, et vältida pragu ja löökide tekkimist. Me teavitame teid saatekirjast. Te peate lihtsalt ootama telefonikõnet, siis võtke kaup lähimast logistikajaamast üles (palun andke mulle eelnevalt teada, kui soovite kauba koju saada).

 

Vacuz Service & tugevus

Teenuse põhimõte
Pakume teile parimat teenust "kiiresti + rahuldavalt + turvaliselt".
Garantiiaeg
12 kuud pärast seda, kui kasutaja on toote kätte saanud.
Garantiiartiklid
Ainult masina konstruktsioonist või tootmisveast põhjustatud ebanormaalse rikke korral,
pakutakse tasuta remonti ja lisaseadmeid.
Tehnoloogiateeninduse võime
Kõik aastatepikkuse kogemusega teenindusinsenerid on saanud spetsiaalse tehnoloogiakoolituse, kes oskavad lahendada erinevaid rikkeid.
Juhendage kasutajat toote täpseks kasutamiseks ja hooldamiseks.
Anda tasuta konsultatsioone elektrooniliste toodete tootmisprotsessi tehnoloogia kohta.
Teenindus pärast müüki
Selleks, et tagada masina normaalne kasutamine, oleks meil koolitus selle kohta, kuidas kasutada, kasutada ja hooldada meie toodet ingliskeelse käsiraamatu, video ja veebipõhise juhendi abil.
Kasutusjuhend
Taotlege toote õiget täissuurust, vastasel juhul mõjutavad valed mõõtmed kasutamise mõju.
Veenduge, et toote kasutamine vastab täielikult kasutusjuhendile.Ärge ületage toodete kasutusala.
Hooldage toodet pärast kasutamist, niiskuskindel, roostekindel, lekkekindel, plahvatuskindel, tuleb hoolitseda regulaarse hoolduse ja kontrolli eest. Kõik tehtud aitavad pikendada kasutusperioodi.
Kasutaja dokumendihaldus
Establish perfect user document management in EPR system, Every product running details would be followed to manage. The users would be taken good care.
About product
1. Product photo: All product photos are taken by real product, There is the color aberration between the product and photo, which is caused by shoot light, product size, manual technology and computer display etc. It’s not quality problem. Parts of products
are changed in appearance due to technology revolutionary and process improvement. SanShine would ensure the parameter of product is unchanged, The product couldn’t affect to use.
2.Product size: All parameters are all measured by manual just for reference. There is a small deviation due to the difference of measure tools, lot products and produce process. Real size should be accordance with the final delivery product.
3.Quality inspection: All products should be inspected strictly before shipment. Ensure the good function and appearance.

Vacuz Machine Video

FAQ With Vacuz

1.How to select the best-suited automatic coil winding machine for your coil?

Tell us your coil data as below please:  OD & ID of the coil before winding, Height of the coil before winding, Layers, Wire Turns, Dia of the copper wire, pictures or videos of products which are better.

2.This is the first time I use this kind of machine, is it easy to operate?

There is an English manual or guide video that shows you how to use the machine.

If you still have any questions, please contact us by e-mail/WhatsApp/WeChat online service.

3.If the machine has any problem after I receive it, how can I do?

Free parts send to you in the machine warranty period. but you need to pay the postage.

4.What’s the MOQ?

1 set machine, mixed order is also welcomed.

5.How can I buy this machine from you? ( Very easy and flexible !)

A. Consult us about this product online or by e-mail.

B. Negotiate and confirm the final price, shipping, payment methods, and other terms.

C. send you the proforma invoice and confirm your order.

D. Make the payment according to the method put on the proforma invoice.

E. We prepare for your order in terms of the proforma invoice after confirming your full payment. And 100% quality check before shipping.

F.Send your order by air or by sea.

WhatsApp/Wechat: +86 13075286997

E-post: sales@vacuz.com