Any machinery in the use of a period of time, or some companies, machinery factories, enterprises and the like will require daily inspection of machinery and equipment devices to protect the next day’s operation, there is no failure, does not affect the normal operation, so to maintain, or cleaning tools, replace some configurations, update the system and so on, such as the use of internal winding machine, maintenance skills are what?

First, daily inspection and correct operation is an important and indispensable step to ensure the proper functioning of the winding machine. First should establish equipment manual for daily records and access to read the operation of the winding machine and the existence of problems, start work to carefully check the table, line guide and the main sliding surface, such as obstacles, tools, impurities, etc., must be cleaned, wiped clean, oiled, carefully check the equipment moving mechanism has no new pull, research, bruising, if any should notify the equipment officer together to see if the analysis is a fault caused by, and make records, check the safety protection, power supply, limit devices should be complete and intact, check the electrical distribution box should be closed securely, good electrical grounding, check whether the equipment accessories are good. Over the line wheel, felt clip, wire release, ceramic parts, etc. should be complete and intact, installed correctly, idle operation test run to observe whether the smooth operation, there is no abnormal noise, etc..

Mähise mähis

Second, although the above work is tedious, but can effectively determine whether the equipment is in good condition and prevent the occurrence of failure. After inspection, such as no abnormalities, then you can normally start the equipment for winding operations, in the operating process as the operator also need to strictly follow the rules of use, there are many inadvertent operations will be different degrees of damage to the equipment, in the use of the process, should be carefully operated, do not do things that have nothing to do with the work. When leaving the equipment for business to stop, turn off the power supply, gas source, should be wound according to the provisions of the process.

Third, not allowed to arbitrarily increase the wire diameter, number of turns and winding speed. Do not allow over specification, overload, overweight use of winding machine winding axis, mold should be clamped correctly, do not allow the use of longer handles to increase the torque of the method of fastening the mold, etc., the spindle and line mechanism of mechanical shifts, mold clamping, adjustment, etc. should be carried out after the stop, with guards to ensure the safety of the operator after an abnormal situation, do not allow unauthorized removal of the safety guards on the equipment, winding machine Especially the line wire rod and winding diameter is not allowed to directly place tools, workpieces and other debris, pay close attention to the operation, such as the discovery of action failure, vibration, heat, crawling, noise, odor, bruises and other abnormalities, should immediately stop to check, troubleshooting, before continuing to work.

Fourth, after completing the operation should be the correct stop and clean, first of all, electrical, pneumatic and other operating switches placed in the non-working position, completely stop the operation of the equipment, cut off the power supply, gas source, clear the debris left in the winding process on the equipment, etc., carefully line displacement mechanism, the discharge axis and other places to oil maintenance, carefully fill out the equipment manual records perfect.

WhatsApp/Wechat: +86 13075286997

E-post: sales@vacuz.com