This winding machine not only has precise mechanical parts, but also is equipped with a powerful electrical control system. It integrates electrical control, sensing technology, mechanical transmission, pneumatic device and other components. Compared with other electrical processing equipment, the debugging method is more complex and delicate. In the automatic winding equipment processing industry, the author has accumulated many years of winding equipment debugging methods.

2.5mm Copper Wire Common Mode Toroidal Coil Inductor Automatic Winding Peeling Taping Machine

This article will briefly introduce the debugging of such equipment, in order to provide assistance to the majority of winding equipment users. The following debugging methods can be applied to the common winding process of barrel and tube coils. Mainly introduces the winding position, enameled wire specifications and winding width of the three important winding parameters.

1, how to set the winding position What is the winding position? In short, it is the starting point of the coil. This position is closely related to the coil head and coil type. A specific value relative to the starting position can usually be measured by the measuring function of the device control system. The operator can also use the fixed point as a reference point and take actual measurements with a ruler for manual measurement, paying attention to the winding direction of the coil when setting the point.

Vibrate Plate Feeding Core Neljä asemaa Common Mode Toroidal Coil Induktori Täysin automaattinen koukku Winding Machine

2, ordinary enameled wire set different wire diameter enameled wire specifications, enameled wire specifications set correctly or not, will directly affect the effect of the cable, the use of different materials of enameled wire need to use different wire diameter correction, copper wire is not easy to increase the amount of correction of about 0.02, aluminum wire after the equipment winding, through the tension of the equipment so that the line is easy to stretch, the correction value is greater than 0.02- The winding width is understood as the distance from the beginning to the end of the winding. Usually, this value directly reflects the need for bobbin winding. It is necessary to consider the effect of slight deformation of the bobbins used on the winding width.

WhatsApp/Wechat: +86 13075286997

Sähköposti: sales@vacuz.com