A) Daily inspection: Daily protective maintenance should be carried out after eight operating hours. After the day’s work, turn off the power of the computer and the machine, vacuum the dust on the back of the machine and wipe the dust dirt on the exterior of the equipment with a white cloth. If the environment is poor, maintenance operations should be carried out more frequently. Note: Do not use organic solvent wipe test, that may damage the equipment surface paint.

Tehdasmyynti Double asemat automaattinen BLDC harjaton Drone Inner Stator ruohonleikkuri moottori kela neula käämitys Machine

B) Weekly inspection:Weekly protective maintenance should be performed after every 40 operating hours, such as a poorer environment, the cycle should be shortened pneumatic lubrication device. Note: The lubricant and oil used must be of good quality. Otherwise, it will increase the surface friction of the screw or guide, which will shorten the service life of the screw, affect the accurate positioning of the machine, etc. Warning: Do not use phosphoric acid and oxidized hydrocarbon synthetics in the lubrication device or in the air circuit of the plant. Check the equipment in the lubrication device and add 100CKR lubricant if needed.

Kuusi karaa BLDC Harjaton Drone Inner Stator High Speed hiustenkuivaaja automaattinen moottori kela neulan käämitys koneen

C) Monthly Inspection:Monthly protective maintenance should be performed every 200 operating hours, if the environment is poor, the cycle should be shortened pneumatic lubrication device. Check the flow away of pneumatic lubricating oil through the observation hole, the flow rate should be divided into 3-5 drops in five minutes, you can turn the groove screw at the top of the lubricating device to the back of the funnel to adjust the flow rate, it should be adjusted to 1/4-1/2 open at the beginning, the clockwise and counterclockwise screw will make the flow rate of lubricating oil increase/decrease.

WhatsApp/Wechat: +86 13075286997

Sähköposti: sales@vacuz.com