What are the work contents and precautions of the internal motor stator coil winding machine?

What is the safe operation of the winding machine?

1, the winding machine before the start to carefully check whether there is no debris on the winding machine table, the winding machine screws are not loose, the power switch is not connected, the enameled wire specifications are in line with the requirements. Confirmation of qualified to start the machine, found fault should be reported to the foreman or biotechnology staff to repair.

2, after turning on the machine first empty run again, pay attention to check the winding machine line, winding turns, reset mode, parking position, etc. whether to meet the requirements, such as does not meet the requirements, must repeat the above steps, readjustment, until the requirements.

3、When the operation is found to have loose screws and abnormal sound, please immediately press the emergency stop switch, and immediately report to the foreman or biotech staff to repair.

4, the winding machine high-speed operation is strictly prohibited to touch the moving parts, in strict accordance with the winding machine operating specifications to use the machine, hanging wire, loading and unloading the skeleton fixture is prohibited to start the machine

5, before work, the operator should be required to do a good job of cleaning and maintenance of equipment, do a good job of cleaning and sanitation around the site, the product parts to be neatly placed, and turn off the power.

Winding machine safety operation precautions

1, the operator must pay attention to safety, after the machine starts, the hand can not be close to the rotating part, need to adjust, must first stop, after the adjustment, the adjustment must be completed to confirm that the hand has left the danger area before restarting the machine.

2, the operator can not wear gloves when working, sleeves can not be too long, female operators with long hair to tie up.

3, when the machine appears abnormal sound, the operator must immediately stop and find equipment maintenance personnel to overhaul, can not take the initiative to avoid the waste of materials and damage to the machine.

WhatsApp/Wechat : +86 13075286997

Email : sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]