Wire winding machine, from the name you can understand is used to wind the wire, the wire type goods coiled into a solid object, but here is the main stator rotor goods winding wire, the key wire is enameled wire.

The basic principle of the winding machine key and winding technology, when there is a stator rotor winding diagram, it will make the corresponding winding program process, into the PLC system inside, you can end the adjustment, when the end of calibration, is a set of automatic process, hold down the open button, the line mouth with the line gradually run, according to the winding program process, the outer winding machine usually commonly used flying fork type winding, the inner winding machine usually up and down Winding wire, go through the whole process, the problem can be stopped within the period, you can also adjust the rate within the permitted standards. When the line is finished, the machine and equipment will cut the line by itself, and then you can take off the goods and change the next stator goods, if you want to produce and process other goods, you can take out the mold shell and change the mold shell made, so it can be used again and again, and it will cause 1 assembly line way, and the mass production of stator rotor can be completed.

Common mode toroidal coil inductor

Common mode toroidal coil inductor

Along with the rapid development of science and technology and continuous progress, the increase in demand for industrial production, the traditional way of winding wire can not meet the demand for stator rotor winding wire, has been gradually replaced, the new automatic winding machine gradually into the market, gradually used in different industries and fields of winding wire.

Automatic winding machines function better if the coils coiled by the self-propelled motor winding machine are flat. However, in the specific winding machine process technology, there are likely to be problems such as uneven coils, overlapping wires on both sides and wires coming off.

It is important to ensure the quality of the winding die and the frame of the motor winding machine, because they are a very critical part of the enameled wire and forming process, which can have a corresponding effect on the style of the coils and it is necessary to ensure that the different components are tightened during the loading and unloading of the die. In order to obtain this effect, the quality of the frame is a critical factor in coil forming.

Common mode toroidal coil inductor

Common mode toroidal coil inductor

Accurate setting of the winding parameters of the winding machine. The motor winding machine is a highly automated machine that allows the linkage of various components. The setting of the parameters of the automatic winding machine determines its operating link. Setting accurate parameters allows the automatic winding machine control system to function better and end up with a high quality coil winding session.

In the winding session of the winding machine, its auxiliary technology, i.e. tension control, has more to do with the winding accuracy. The setting should take into account the safe tension value of the enameled wire. At the same time, the adjustment should be ended according to the specific process technology conditions. Accurate setting of the tension value will have a great impact on the coil forming.

WhatsApp/Wechat : +86 13075286997

Courriel : sales@vacuz.com