Attention should be paid to the operation before starting the internal stator coil winding machine

Inside the winding machine spindle bearing is to indicate the rotating driving force to drive the driving force axis of the enameled wire rotation, different models and specifications of the winding machine its spindle bearing configuration are not the same, winding machine spindle bearing adjustment generally includes the following several aspects: out of the shaft parts, parallelism adjustment, additional other winding production process, out of the shaft parts of the adjustment is generally due to the winding machine in the entire process of winding spindle bearing and kitchen The spacing between the table surface does not meet the requirements of the manufacturing production process, each production process must be certain work on the indoor space design, out of the shaft part of the change to pay attention to the specifications of the open part of the housing, whether the adjustment will hurt all the normal operation of other prefabricated components; parallelism adjustment is the most common, winding machine in the operation of a period of time winding axis and mold thimble in the middle of the parallelism will cause deviation, and be sure to immediately repair the adjustment. Be sure to immediately repair the adjustment.
Inside the winding machine should be carefully considered before starting the winding machine work on the ground whether there is dirty, whether the winding machine screws have fallen off, the power switch is not connected, whether the specifications of the enameled wire meet the requirements. Verification qualified to start, found common faults should be immediately reported to the catering supervisor or biotechnology workers to repair. After starting the machine first idle run again, pay attention to check the winding machine line row, winding turns, reset the way, parking parts, etc. whether to meet the requirements, such as not meet the requirements, try to constantly up and down the steps, adjust again, until to ensure that the requirements have long been.

Inside winding winding machine role is relatively simple, only to maintain the electronic components count, total output accumulation, spindle bearing positive and negative to manipulation and other simple role, important modules are generally used single-chip computer. Today, the vast majority of low-end winding machine automatic control system on the market today are using this type of control measures, the use of single-chip automatic control system, relative to the preliminary hand-pulled winding machine, with high technical strength of automation technology, lighter weight, high linearity, reducing the construction staff staff.

The above explained is the start of the winding machine should pay attention to the operation, I hope to see can help you, if you want to know more about the winding machine related information, welcome to consult customer service online or call the company’s service hotline (upper right corner of the website) for consultation, we will be happy to provide you with attentive service!

WhatsApp/Wechat : +86 13075286997

Email : sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]