Automatic winding machine commonly used several repair methods

Automatic winding machine failure needs attention to ensure the normal operation of a winding machine, the usual view and accurate operation is an important and essential process, first of all, to establish a manual device, the usual record and visit to read around the machine’s operating conditions and the existence of questions, the beginning of a careful examination of the table, as well as the main linear guide sliding surface, so when there are obstacles, things and other impurities, it is necessary to clean The oil, scrub clean, carefully check the operation mechanism of these devices without pull, study, fluctuations, should tell the device together to see if it is classified as a fault analysis, and make a good record, check the safety maintenance, power supply, limit the equipment should be completely flawless. View the electrical distribution box should be closed solid, electrical grounding, view the equipment of the accessories well. Over the line wheel, Maojenjia line, ceramic components, etc. should be intact, accurate installation, idle speed experiments to investigate the smooth operation, no abnormal noise, etc.. The above operations, although tedious, but can be determined in an outstanding equipment condition and fault prevention.

Fish wire winding machine to be viewed by no anomalies, you can normally start the winding equipment, the operation in the process of operation is also in strict accordance with the rules of use, there are many careless operation will form different degrees of damage to the equipment, in the use of the process, should be careful to operate, do not do things that have nothing to do with the work. Because of this incident to make the equipment suspended, closed power, gas, should be in accordance with the surrounding technical requirements. Not allowed to arbitrarily add the number of turns and wire diameter, line speed. No standard, overload, excess winding machine, spool, the mold clamping is not accurate, fastening torque to add the mold is no longer handling methods, mold and mechanical transmission, the main cable clamping mechanism, adjustments should be made in the park to maintain the equipment to ensure the safety of the operator and equipment anomalies, is not allowed to privately disassemble the safety maintenance equipment, especially cable winding machine winding wire diameter is not allowed to place directly Things, workpieces and other debris, pay attention to the operation, such as the discovery of anomalous lifting loss, shock, fever, prostration, noise odor, fluctuations, should immediately park to view, fault clearance, able to continue to work.

Toroidal Coil winding machine to be accurate closure and cleaning should be completed operation, electrical and pneumatic operation switch in non-operating position, completely suspend the operation of the equipment, block the power supply, air source, remove debris surrounding the process left in the equipment, the mechanism of severe cable spool displacement, raised in the refueling and maintenance. Fill in the equipment manually recorded sound.

WhatsApp/Wechat : +86 13075286997

Email : sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]