Coil winding machine shortcomings require attention to ensure the normal operation of a winding machine, routine inspection and accurate operation is an important and essential process, first of all, to set up a manual device, routine records and visits to read the operating conditions of the coil winding machine and the existence of the problem, the beginning of a careful inspection of the table, as well as the main sliding surface of the linear guides so that when there is an obstacle, things and other impurities, it is necessary to wash Scrub clean, oil, carefully check the operating mechanism of these devices do not pull, seminar, not firm, should notify the equipment together to see if it is attributable to the shortcomings of the analysis, and make a good record, check the safety and maintenance of the power supply, restraining equipment should be completely flawless. Check the electrical distribution box should be closed robust, electrical grounding, check the attachment of the equipment is good. Over the wire wheel, MaoZhanJia line, ceramic components, etc. should be defective, accurate device, idle test query smooth operation, no abnormal noise. The above work is tedious, but can be determined in an excellent condition of the equipment and shortcomings to avoid.

Four Stations Automatic BLDC Motor Winding Machine

After checking no abnormal condition, you can launch the winding equipment normally, the operation in the process of operation is also in strict accordance with the rules of use, there are many operation inadvertently will constitute different degrees of damage to the equipment, in the process of use, should be careful to operate, do not do work unrelated to the operation. Because of this work to make the equipment intermittent, closed power, gas, should be in accordance with the coiling skills requirements. Not allowed to arbitrarily increase the number of turns and wire diameter, wire speed. No specification, overload, overload of the winding machine, bobbin, the mold clamping is not accurate, tightening torque to increase the mold is no longer processing methods, molds and mechanical transmission, the main cable clamping organization, adjustments should be carried out in the park in order to maintain the equipment, to ensure the safety of the operator and the equipment of the abnormal situation, is not allowed to privately dismantle the safety and maintenance of the equipment, in particular, the cable winder winding wire diameter is not allowed to be directly placed! Things, workpieces and other sundries, pay attention to the operation, such as the discovery of abnormal behavior loss, shock, heat, creeping, noise, smell, not firm, should immediately park the car to check, shortcomings clean up, able to continue to operate.

Automatic Brushless Inner Stator Coil Servo Motor Type Needle Winding Machine

Accurate closure and cleaning should be completed operations, in the non-operational position of the electrical and pneumatic operation of the switch, completely interrupt the operation of the equipment, blocking the power supply, gas source, remove debris coiled process left in the equipment, the mechanism of severe cable spool displacement, put forward in the refueling and repair. Fill in the equipment manual recording motion.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com