Adjustment and service life of six-spindle stranding machines

In the electrical industry, many people will use the automatic six-axis stranding machine, but for the tensioner system but do not know how to adjust, with what skills, automatic winding machine manufacturer here summarizes the three points of information.

The first: can be applied to the wire diameter 0.06 ~ 0.13mm tensioner for example, the tensioner with two adjustment nuts, adjusting nut 1 and adjusting nut 2. Adjustment nut 1 is marked with 0 ~ 5 files of the scale, tension range 20 ~ 130g, where each scale tension value of about 26g.
The second: the adjustment nut 2 is marked with a scale of 0~5 gears, used to control the bending angle of the fishing rod, the angle adjustment range is about 0~30°, for the same force case, the larger the reading of the adjustment nut 2 scale, the smaller the bending angle; the smaller the reading, the larger the bending angle.
The third: in the normal winding situation of the automatic winding machine, over the fishing rod over the line of the spout and the oil cup on the line over the hole to flush as the best.
Winding machine is one of the common electronic processing equipment, in the process of using the equipment, to ensure the production efficiency of enterprises, first of all, the normal operation of the equipment and to ensure that the equipment production efficiency, and secondly, is also very important, that is to ensure the service life of the equipment. Today, we mainly talk to you about the installation process of the winding machine may affect its service life of some of the problems, I hope to draw attention to.
Yes, in fact, from the installation of the wrapping machine equipment, there are already some problems that will affect the future service life of the equipment exists, so we need to pay particular attention. For example, the foundation of the equipment after casting and installation to avoid damage to it, usually in the upper part of the foundation to be covered with a guard plate to ensure the service life of the base of the winding machine.
In the installation process, there are many places that we need to pay attention to and consider, such as the environment, geological conditions, climate and temperature and other aspects to make a comprehensive consideration. When the equipment is installed, we need to measure and control the depth of the foundation according to the geological conditions of the installation site, and make appropriate judgments to ensure that the winding machine is fixed and installed on a stable reinforced concrete foundation.
In the ring type wrapping machine installation casting foundation, the specific location of the equipment lubrication system and electronic control system can be adjusted according to the specific needs of the production and the overall installation of space use of its location of reasonable arrangements, but to ensure that the installation sequence of the electronic control system and lubrication system can not be changed to prevent serious production accidents.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility”” class=”” id=”"][/fusion_form]