For example, tensioners with wire diameters of 0.06 to 0.13 mm are provided. The tensioner is provided with two adjustment nuts, an adjustment nut 1 and an adjustment nut 2. The adjustment nut 1 is marked with a scale from 0 to 5 and a tension range from 20 to 130 grams, where each scale tension value is about 26 grams (reference value). When nut 1 is twisted to the right, the tension value will become larger; conversely, if nut 1 is twisted to the left, the tension value becomes smaller.

The adjustment nut 2 is marked with a scale of 0~5 steps, which is used to control the bending angle of the fishing rod. The angle adjustment range is about 0~30°. For the same tension, the larger the reading of the scale of adjusting nut 2, the smaller the bending angle; the smaller the reading, the larger the bending angle.

In the case of normal winding, Z is better to pass the line on the fishing rod and the line on the oil cup.

Automatico universale motore statore bobina avvolgimento macchina-2

Automatic winding machine tensioner adjustment method description.

1. After hanging the line, check the tension first before you start winding. You can use your finger to press down the line to check if it is flexible. If the tension is too big, the disconnection frequency of the winding will increase. If the tension is too small, it will directly affect the whole column. Degree. During the winding process, adjust the tension as needed. When the wire is not pulled apart, the tension is higher and the voice coil is better aligned.

2. If the wire on the pendant is loose, it can be solved by increasing the tension if the pendant is in the correct position.

3. If the coil resistance, alignment and total turns are normal, the coil length will have a small margin of error (e.g. 0.01mm). If the coil length is greater than the actual demand, the tension can be adjusted slightly to increase the tension; if the coil length is less than the actual demand, the tension can be reduced by a small amount.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com