In the brushless motor production, the stator coil winding process is more troublesome, considering the needs of many products, the need to achieve efficient production, configure a special high-speed winding machine equipment, common is the four-position and six-position high-speed internal winding machine, then what are the requirements of high-speed internal winding machine on the stator? Vacuz give you an analysis of what stator products?

Statore del motore automatico ad alta velocità macchina avvolgimento interno (sei stazioni)

High-speed internal winding machine stator requirements:

1. Outer diameter of stator: the outer diameter should not be too big, generally around Φ12mm-Φ80mm, more than the available duplex internal winding machine.

2. Stator stack thickness: the stack thickness should not be too high, generally in the Φ5mm-Φ80mm or so, if more than that, the wire pendulum arc is very large, easy to hurt the wire scraping line, can be used for double-station internal winding machine.

3. Enameled wire diameter: the diameter of the wire should not be too thick, generally around 0.08-0.7, if more than that, generally use double-station or four-station equipment.

High-speed internal winding machine in addition to these needs for the stator, but also need a high quality tensioner mechanism, line mechanism, servo motors and drive controllers, etc., as well as screws, guide rails, cylinder parts and so on.

Regolazione della macchina di avvolgimento dello statore

High-speed internal winding machine is mainly suitable for stator smaller, fine wire diameter products, such as 110,000 rpm high-speed wind turbine motor, electric toothbrush motor, small water pump motor, stepping motor and other stator products, we in the choice of high-speed internal winding machine, must be more comparisons, choose the strength of the manufacturer, to ensure that the machine is of high quality, stable and smooth operation!

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com