Automatic motor winding machine in the process of ensuring that the stator slot full rate up to standard, its core competitiveness stems from three aspects: accurate mechanical control technology, cutting-edge electrical system applications and refinement of the process design strategy, the following Vacuz give you an introduction to it!

First, the core role of accurate mechanical control technology

1. Accuracy of the tension control system: the built-in tension control system of the automatic winding machine can meticulously regulate the tension of the wire in the winding process, not only to prevent over-tightening of the breakage, but also to avoid over-loosening caused by the relaxation, thus ensuring that the tightness and uniformity of the winding, in order to enhance the groove fullness to lay a solid foundation.

2. Accurate planning of the winding path: through the carefully designed winding path, the layout of the wire in the winding slot is optimized, effectively avoiding contact with sharp edges, reducing wire wear and tear, and at the same time, utilizing the winding space as much as possible to achieve a significant increase in slot filling rate.

Second, the empowerment of cutting-edge electrical system

1. Intelligent PLC programming control: The fully automatic winding machine realizes the full automation of the production process with the help of PLC programming control technology. The accuracy of programming ensures the accuracy of key parameters such as winding speed and position, which provides technical guarantee for the improvement of slot filling rate.

2. The construction of real-time monitoring and feedback mechanism: in the winding process, a series of sensors and monitoring equipment as the “wisdom of the eye”, real-time monitoring of the position, tension, speed and other key parameters, and instant feedback data to the control system for analysis and adjustment. This mechanism ensures that the winding process is always in perfect control. This mechanism ensures that the winding process is accurate and controllable, and provides strong support for the stability of the slot full rate.

Third, the contribution of refined process design

1. Scientific selection of wire: According to the specific design requirements of the motor, the diameter of the wire and the thickness of the insulation layer are scientifically selected. Although the matching of fine wire diameter and thin insulation layer can reduce the space occupation, it needs to be carried out under the premise of ensuring the heat dissipation and insulation performance of the motor, so as to realize the balance between slot fullness and performance.

2. Optimization of insulation treatment: As an important part of motor design, the rationality of insulation treatment is directly related to the performance and safety of the motor. By optimizing the insulation thickness and layout, it not only ensures the characteristics and safety of the motor, but also effectively reduces the occupation of slot space, creating conditions for the improvement of slot filling rate.

3. Application of advanced winding technology: By changing the winding and assembly methods, the utilization of the internal space of the motor is realized. At the same time, the application of automatic detection system ensures that the electrical performance of the winding meets the standard, which provides a double guarantee for the improvement of slot full rate.

Fourth, the importance of maintenance and maintenance

1. The necessity of regular inspection: regular inspection and maintenance of automatic winding machine is the key to ensure its continuous and stable operation. Through the comprehensive assessment and adjustment of the state of each component, it reduces the winding quality problems caused by equipment failure, and provides a strong guarantee for the stability of the slot full rate to meet the standard.

2. Training and implementation of operation norms: professional training for operators and strict implementation of operation norms is an effective way to reduce the impact of human errors on the quality of winding. By improving the professionalism and skill level of the operators, the stability and reliability of the slot full rate is further guaranteed.

In summary, the fully automatic motor winding machine, with its accurate mechanical control technology, cutting-edge electrical system application and refined process design strategy, has shown excellent performance and advantages in meeting the requirements of stator slot filling rate. At the same time, regular maintenance and upkeep, as well as strict training and operation standards, are also important guarantees to ensure its long-term stable operation and stable slot filling rate.

メール： sales@vacuz.com