自動モーター固定子コイル巻線機の自己診断故障と解決策！

Self-checking fault and solution of automatic winding machine!

A common fault of the loading box and sweep

Faults.

1, over the line hole blockage affects the wire feed, winding.

2, the four corners of the wire frame easy to wrap the line, forming a broken line or broken line maintenance stop. Automatic wire winding machine Elimination: 1.

1, irregular observation, clean over the line hole dust, waste, adhere to the line hole unclogged.

2, the wire frame needs to be placed on the enameled wire to the Z best position.

Second, the twisted wire group common problems and sweep

Fault.

1, twisted wire twist is not tightly formed loose wire, the impact of winding unsuccessful.

2, twisted wire twist line is too long or too short, the production of twisted wire or loose wire products.

3, twisted wire motor does not work or motor work but not twisted wire.

Removal.

1, adjust the flexibility of the twisted wire splint, adjust the position of the groove from the Urethane.

2, adjust the balance of the strength of the taut spring, adjust the position of the pressure line group Ulli rubber.

3, check whether the power plug is loose, or poor contact, motor operation but not twisted wire.

To check whether the rotating shaft screw inside the motor is loose or stuck.

WhatsApp/ウィチャット+86 13075286997

電子メール：sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="small-visibility,medium-visibility,large-visibility" class="" id=""][/fusion_form].