What do I need to check before operating the ring winder?

A, automatic fish line winding machine winding machine and its auxiliary equipment inspection and maintenance
1, horizontal winding machine inspection and maintenance
(1) often check the lubrication of the rotating parts to ensure good lubrication.
(2) often check the tightening of the bolts in various parts, found loose to tighten in time, especially the tailstock foot bolts must be solid and reliable.
(3) when the machine is rotating, do not allow the operation under the winding.
(4) work, always check the flower plate, the top of the tailstock for bending and fracture, and repair the problem in time.
(5) when the machine is rotating, do not allow the operation of changing direction, speed shift.

2, the vertical ring type winding machine inspection and maintenance
(1) check whether the winding machine disk and winding die docking bolts have been tightened, or must be tightened again.
(2) winding machine power supply is broken and other unsafe factors, if any, should be excluded.
(3) Check whether the telescopic cover is well telescoped and adjust the size of the opening and closing to about 150ram from the outer diameter of the flower plate or winding winding to ensure safe operation.
(4) check around the winding machine there is no hanging belt or prevent the operation of the workpiece or other objects, otherwise should be reconnected to arrange the position of the wire reel frame and other workpiece objects.
The above-mentioned content check is correct before starting the winding machine winding work.
Second, the winding press machine and assembly frame inspection and maintenance
(1) whether the lifting system of the ring wrapping machine is working normally, if there is jamming, tilting, stall speed and other faults or unsafe factors, professionals should be asked to repair and eliminate unsafe factors.
(2) Whether the electrical part of the power supply and protective cover is broken and other unsafe factors exist, if so, should be excluded.
(3) whether the center of the winding is right with the pressing mechanism, otherwise it should be right.
(4) whether there is an operator under the compacting machine, when starting the compacting machine, no standing person is allowed below.
(5) The hydraulic pressing machine must check whether the pressure gauge is within the use period, whether the reading is correct, whether the hydraulic station works normally, whether the hydraulic oil is sufficient, otherwise it should be excluded before operation.

WhatsApp/ウィチャット+86 13075286997

電子メール：sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="small-visibility,medium-visibility,large-visibility" class="" id=""][/fusion_form].