Automatic winding machine debugging video_automatic winding machine tutorial_automatic winding machine general common functions are lap preset, automatic parking, forward and reverse winding, automatic cross-slot, etc. In actual use, should pay attention to a few points: first of all, the start winding slow and stop slow, start winding slow this function is the equipment after the start of slow running, the purpose is to reduce the impact on the tension structure and enameled wire, according to the actual needs Set the general situation for 1 to 3 turns, stop jogging function is the equipment in the end of the winding step before the jogging operation, this function can reduce the impact on the brake to make the equipment end winding smoothly, especially the need for accurate positioning of the winding process, the parameters must be set, according to the equipment running speed is different, the parameters should be adjusted accordingly general situation for 2 to 5 turns, again is the row of wire direction and winding direction, these two parameters are set for the displacement direction of the line and the direction of spindle rotation.

1, the winding machine connection: before the line is almost finished using the new line and the old line after the knot, manually pull to the guide pin before starting.

2, in the automatic working state personnel body shall not be put into the skeleton material slot and the area in the middle of the loading tooling, otherwise there will be a danger of hand clamping.

Automatic wire winding machine manufacturer

자동 모터 와인딩 머신

3, the path of the line before the start of the machine to confirm the porcelain eye, anti-jumper passing situation, the flywheel of the tensioner must be over the line a circle. Open the unloading switch can be easily manually clip the line, must be closed before turning on the machine, otherwise the clip line will not be secure.

4、If there is an accident of power failure or emergency stop, please reset and restart after re-clamping the line.

5、Please make sure the electricity and compressed air are in place and reset in the manual state before starting. When operating the transformer coil automatic winding machine, the operator needs to pay attention to the operation, just pay attention to the above matters, you can reduce the occurrence of failure, will not slow down the production efficiency.

왓츠앱/위챗: +86 13075286997

이메일: sales@vacuz.com