비표준 자동화 장비 유지보수 작업 수행 방법

Non-standard automation equipment is equipment that is unique to the user and customized according to the user’s needs. The general maintenance is a little more complicated than the usual standard machines, how to maintain and repair such equipment? Next, Vacuz will give you a brief introduction!

1. When installing, dismantling and adjusting the slewing mechanism, care should be taken to ensure that the angle between the non-standard automation equipment and the centerline and gear centerline is parallel and appropriate. The correct angle can effectively ensure the operation of the machine.

2. Non-standard automation equipment should always check the maintenance and connection of each part, and tighten it if it is loose. When the valve body is under pressure, please check the sealing of the valve body connecting bolts, and all connecting shafts need to have a cotter pin and need to be fully opened to slowly level the main parts.

3. easy to wear parts are often replaced, if there is a fault, we need to eliminate the fault before continuing operation, motor bearings should be fully lubricated, ensure that all wires and cables are checked for damage, damaged parts must be repaired and replaced in a timely manner to effectively extend machine maintenance time.

The maintenance of non-standard automation equipment helps to extend the service life of the equipment and make the use of the equipment more accurate.

The above is the main maintenance of non-standard automation equipment, master these basics, in order to bring more convenience to the production!

왓츠앱/위챗: +86 13075286997

이메일: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="작은 가시성,중간 가시성,큰 가시성" class="" id=""][/fusion_form]