Toroidal transformer winding machine is an ordinary transformer winding machine with relatively stable performance and fast winding speed. However, some new purchasers of the equipment often report that the winding is not neat, what is the main reason for this?
1. Improper use of wire specifications
Toroidal transformer winding machine is a highly automated equipment, it is also very adaptable, can adapt to 0.02mm-0.4mm, but if the wire diameter is set to 0.03mm, the parameters on the machine will be set to 0.4m, which is certainly not neat.
2. Insufficient compressed air pressure
Toroidal transformer winding machine also needs compressed air. If the compressed air pressure is not sufficient, the winding may not be wound neatly. Therefore, it is necessary to check the air compressor and related supporting facilities.
3. Other causes of improper operation
Especially if you are not familiar with toroidal transformer winding machine, please make sure to read the relevant manual and strictly follow the safety operation rules of automatic winding machine. If improperly operated, it will cause various problems, untidy winding is still only a secondary problem. This includes improper CNC adjustment, structural problems of the wire feed wheel, whether the wire harness model frame is reasonable and whether the tension is well adjusted.
These are the reasons for the untidy winding of toroidal transformer winding machine, master these basic reasons in order to find the operation of the problem, in order to better solve the problem and ensure the normal operation of transformer winding machine.
왓츠앱/위챗: +86 13075286997
이메일: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="작은 가시성,중간 가시성,큰 가시성" class="" id=""][/fusion_form]