How to maintain the automatic winding machine equipment

Daily inspection: Daily protective maintenance of the CNC winding machine should be carried out after eight operating hours. At the end of the day, turn off the power of the computer and the machine, vacuum the dust on the back of the machine and wipe the dust stains on the exterior of the equipment with a white cloth. If the environment is poor, maintenance operations should be carried out more frequently. Note: Do not use organic solvents to wipe, which may damage the equipment surface paint.

Weekly inspection: weekly protective maintenance should be performed after every 40 operating hours, if the environment is poor, the cycle should be shortened pneumatic lubrication device. Note: The lubricant and oil used must be of good quality. Otherwise, it will increase the surface friction of the screw or guide, which will shorten the service life of the magnetic ring winding machine screw, affect the accurate positioning of the machine, etc. Warning: Do not use phosphoric acid and hydrocarbon oxide synthetics in the lubrication device or in the air circuit of the plant. Check the equipment in the lubrication unit and add 100CKR lubricant if needed.

Monthly inspection: monthly protective maintenance should be performed every 200 operating hours, if the environment is poor, the cycle should be shortened pneumatic lubrication device. Check the flow of pneumatic lubricating oil by observing the stranding machine hole, the flow rate should be divided into 3-5 drops in five minutes, you can adjust the flow rate by turning the groove screw at the top of the lubricating device to the back of the funnel, it should be adjusted to 1/4-1/2 open at the beginning, the counterclockwise screw will make the flow rate of lubricating oil increase/decrease.

왓츠앱/위챗: +86 13075286997

이메일: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="작은 가시성,중간 가시성,큰 가시성" class="" id=""][/fusion_form]