Automatic Coil winding machine manufacturers teach you how to test adjust the automatic motor stator coil winding machine

The automatic winding machine is composed of computer control system, main machine, wire arrangement and wire release arrangement. Under the control of computer program, the main machine can complete slow start, intermittent, even speed work, uniform and precise wire arrangement, positive and negative winding, and ensure the winding process tension stability; the wire arrangement has the function of straightening the wire, and the wire arrangement has the function of completing the reversal of the bobbin and automatic tracking.

When the purchase of automatic winding machine manufacturers of automatic winding machine in the future, the primary need to power no-load test work, the process is to check whether the work of the winding machine is smooth, whether there is abnormal noise, as debugging personnel in the process should be compared to the winding machine manual to check each function is useful, is also a process to understand the equipment, the beginning of understanding the function of the equipment to find out the relative winding process according to their own products Corresponding equipment features, combined with the process to check whether the equipment features with the winding requirements, equipment features required in the procurement of detailed communication with equipment suppliers to avoid the purchase of equipment and winding requirements do not pay, here to pay attention to the equipment is the allowable wire diameter, large weight, line width and its accuracy, these parameters are the fundamental data to choose whether the equipment and winding requirements.

Commissioning personnel understand the equipment functions and parameters, but also the need for winding machine tension scheduling and winding mold data determination, in general, the larger the diameter of the wire used for winding the greater the demand for tension, different automatic winding machine manufacturers of equipment tension scheduling planning are different, the use of aluminum and copper wire tension required is also different, the same wire diameter of aluminum wire tension required than copper wire to be small, tension scheduling Too large will lead to the practice of winding the wire diameter on the mold becomes smaller, if it is a fine line, it will be pulled off, knotting and other phenomena, the tension is too small will present the coil swelling, disorderly line, etc., so the tension scheduling is very important setting, different wire diameter have a safe tension planning, “enameled wire safety tension” book has a detailed description, the commissioning staff should be carefully compared, the determination of the winding mold, the need to pay attention to the The width and height of the mold, and whether the winding bar match, too tight will affect the mold loading and unloading, too loose will lead to mold shaking affect the role of the line.
To measure the data of the winding mold, we need to pay attention to the width and height of the mold, whether it matches with the winding bar, too tight will affect the loading and unloading of the mold, too loose will cause the mold to shake and affect the role of the line.

The understanding of the winding width is from the beginning of the winding orientation to the end of the winding orientation between the interval, usually the value directly reflects the skeleton needs to wind the length of the skeleton, the need to consider the use of the skeleton of the slight deformation of the winding width of the impact, should choose to use a comprehensive measurement method to take the small value as the winding width.

왓츠앱/위챗: +86 13075286997

이메일: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="작은 가시성,중간 가시성,큰 가시성" class="" id=""][/fusion_form]