How to prevent the winding machine motor from exploding?

The motor is an important part of the winding machine, and it is also a part that is prone to accidents. Many failures are caused by our improper operation. As long as we follow the correct operation mode of the winding machine, we can prevent the winding machine motor from exploding.

Specific methods are as follows.

1. first of all, to understand the instruction manual of the winding machine.

2. understanding the instruction manual for manufacturing transformers or coils.

3. understanding what is the starting point, what is the width and other parameters.

4. Enter the relevant parameters and debug them as needed.

Then, we have to follow the standard steps in the instruction manual of the winding machine, paying attention to the following points.

1. installation essentials: move the machine to the intended production line, position it well, install the air pressure, adjust it to 40 degrees.5kg/cm2, plug in the 220V single-phase power and install the ground wire.

2. points before starting: check whether the parts are loose or displaced, and adjust, correct and lock; whether the wire joints of each ministry are tightened, and re-check the above completion.

3. Open the air switch, use a multimeter to measure and confirm that the voltage 220V is correct; open the power knob switch. Enter the working range of the man-machine screen at this time.

왓츠앱/위챗: +86 13075286997

이메일: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="작은 가시성,중간 가시성,큰 가시성" class="" id=""][/fusion_form]