Automatic toroidal coil inductor winding machine daily check and proper operation

To ensure the normal operation of an automatic winding machine, daily inspection and correct operation is an indispensable and important process.

First of all, prohibit the use of over-standard, over-load, over-weight wire binding machine, winding axis, mold should be clamped correctly, prohibit the use of a longer handle to increase the torque of the method of fastening the mold, etc., the spindle and line organization of mechanical shifts, mold clamping, adjustment, etc. should be carried out after parking, with a protective device is to ensure the safety of the operator after the equipment presents abnormalities, prohibit the private dismantling of the equipment on the safety protection device. Tying machine, especially the line wire rod and winding diameter is prohibited to directly place things, workpieces and other debris, pay close attention to the work situation, such as action failure, vibration, heat, creeping, noise, odor, bruises and other abnormalities, should immediately park the car to check, troubleshooting, before continuing to work.

Automatic winding machine manufacturer

Should establish equipment manual for daily records and access to read the work of the wire binding machine and the existence of problems, the beginning of the operation to carefully check the operating table, line guide and the primary sliding surface, such as obstacles, things, impurities, etc., must be cleaned, wiped clean, oiled, carefully check the equipment mobile organization has no new pull, research, bruising, if there should be told the equipment officer together to check and analyze whether it is attributable to the fault and make a good record, check the safety protection, power supply, limit and other devices should be completely flawless, check the electrical distribution box should be closed reliable, good electrical grounding, check whether the equipment accessories are good. Over the line wheel, felt clip, wire release, ceramic parts, etc. should be completely flawless, installed correctly, idle work test run to observe whether the work is smooth, there is no abnormal noise, etc.. Although the above operation is tedious, but can effectively judge whether the equipment is in good condition and prevent the generation of failure.

After checking if there is no abnormality, then you can normally start the equipment for winding operations, in the operating process as the operator also need to strictly follow the rules of use, there are many inadvertent operations will be different degrees of damage to the equipment, in the use of the process, should be careful operation, do not do things that have nothing to do with the work. Leave the equipment for business to park, turn off the power supply, gas source, should be wound according to the rules of the process. Forbid arbitrarily increase the wire diameter, number of turns and winding speed.

왓츠앱/위챗: +86 13075286997

이메일: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="작은 가시성,중간 가시성,큰 가시성" class="" id=""][/fusion_form]