It is a relatively common problem for automatic coil winding machines to pause during operation, this can be due to a variety of reasons, here are some possible solutions:

2 스핀들 자동 BLDC 브러시리스 드론 모터 고정자 와인딩 머신

1. check the power and cable connections: check if the power and cable connections of the automatic bobbin winder machine are normal, if the power or cable is loose, it may cause the machine to stop working, make sure all the connections are tight, and re-plug the cables if needed.

2. Check the sensors of the winding machine machine: the automatic winding machine machine is usually equipped with some sensors to detect the position and status of the coils, if the sensors are malfunctioning, it may cause the machine to stop working, check if the sensors are working properly and replace them if needed.

3. Check the mechanical parts of the bobbin winder machine: the mechanical parts of the automatic bobbin winder machine may be subject to wear and tear or damage, check if the mechanical parts of the bobbin winder machine are working properly and replace them as needed.

4. Check the program settings of the bobbin winder machine: Check if the program settings of the automatic bobbin winder machine are correct, if they are not set correctly, it may cause the machine to stop working, make sure that the program settings are correct and adjust them as needed.

5. Check the cooling system of the winding machine: the automatic winding machine may stop working due to high temperature, check whether the cooling system is working properly, and clean and maintain it as needed.

2 스핀들 자동 BLDC 브러시리스 드론 모터 고정자 와인딩 머신

Automatic winding machine internal configuration has some precision mechanical components, such as the spindle drive and line system, these components are more prone to failure, but experienced friends are easier to find, mainly in the temperature rise, strong vibration, noise, etc., pay attention to observe the spindle and the line system operation, whether it does not do a good job of lubrication, whether the parts produced by the displacement, the pitch is not reasonable, screws are loose, components have If the screws are loose, the parts are damaged, etc., the suspicious parts are carefully checked and investigated to ensure that the mechanical system is complete without failures.

왓츠앱/위챗: +86 13075286997

이메일: sales@vacuz.com