How to troubleshoot the rotor automatic production line

In the past, the assembly of motor rotors mainly rely on workers to, and now many manufacturers have introduced automated production lines, production efficiency has increased significantly, but as long as the machine, there is a possibility of failure problems, how to troubleshoot these problems?

The rotor automatic production line is mainly composed of control system, sensing components and execution elements. If it fails to operate normally, there must be a malfunction, which may be a hardware problem or an operational problem, and needs to be investigated one by one.

1. Power supply, air source and hydraulic source

Sometimes, the automatic rotor production line may not be a big problem, but a problem with the power supply, air source and hydraulic source, which should be checked to make sure it is normal. There is also the electrical, pneumatic and hydraulic circuit, we should pay attention to check the state of the circuit, whether there is a problem with the air pipe, whether there is a blockage of the oil pipe, the above problems, should be dealt with in a timely manner, the bad should be replaced.

2. Sensor position failure

Sometimes, the rotor automatic production line after a long time use, some sensor position may change, or failure, or sensitivity is not good, in the start-up operation, be sure to check whether these sensors are normal, induction is sensitive. If there is a failure, you need to replace, if the position is not correct, you need to promptly adjust.

3. Relay, throttle or pressure valve problems

If there is a problem with the relay, it will affect the circuit, can not be used normally, to replace the relay, throttle, pressure valve these spare parts in vibration, easy to loosen the situation, pay attention to the daily use before remembering to maintain.

Generally speaking, the rotor automatic production line problems, is the above-mentioned common reasons, every day before starting, pay attention to check to ensure that the normal start, run to see if the equipment is normal, remember to do a good job of maintenance after work.

왓츠앱/위챗: +86 13075286997

이메일: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="작은 가시성,중간 가시성,큰 가시성" class="" id=""][/fusion_form]