Brushless motor winding machine is mainly for all kinds of brushless inner winding and outer winding stator, the common functions are automatic winding, automatic lineup, automatic rotation, automatic clip shear, automatic start/stop, lap setting, speed adjustment, forward/reverse winding, automatic cross slot, etc. It is not only widely applicable, but also indispensable equipment for brushless motor production.

Selection of brushless motor winding machine testing as follows:

1, need to power on and no-load test run. This process is first of all to check whether the operation of the winding machine is smooth and whether there is abnormal noise. As the commissioning personnel, should check each function in the winding machine manual one by one to see if it is effective, which is also the process of familiarization with the equipment.

2, after the initial familiarity with the function of the equipment, should be based on their own product winding process to find out the corresponding equipment features, check whether the equipment features meet the winding requirements.

3, in the procurement of equipment function requirements, need to communicate in detail with the equipment supplier, should pay attention to the allowable wire diameter, load, and width and precision of the equipment, these parameters are the basic data to determine whether the equipment meets the winding requirements.

Brushless motor winding machine to adjust the tension:

1, the larger the wire diameter used in the winding, the greater the tension.

2, the tension adjustment range of the equipment differs from manufacturer to manufacturer.

3, the use of aluminum and copper wire required tension is different, the same wire diameter of the aluminum wire required tension is less than the copper wire.

Excessive tension adjustment will lead to the actual wire diameter around the mold becomes smaller, if it is a fine line, there will be pulled off, knots and other phenomena, the tension is too small will appear coil is very large, line confusion and other phenomena, so the tension adjustment is a key setting, different wire diameter has a safe tension range, enameled wire safety tension details, commissioning personnel should be carefully compared, winding mold measurement, should pay attention to the mold width and height, whether match with the winding bar, too tight will affect the mold loading and unloading, too loose will lead to mold shaking, affecting the effect of the lineup.

What are the common functions of brushless motor winding machine? How to detect and adjust the tension? As a professional winding machine manufacturer, the above is a simple explanation of Vacuz, I hope these tips can help you!

왓츠앱/위챗: +86 13075286997

이메일: sales@vacuz.com