About the fan winding machine installation and use of the environment is divided into which, I take you to understand!

Fan winding machine installation methods are as follows.

Fan winding machine table and foundation should have sufficient strength and stiffness to avoid fan winding machine at high speed when moving violent vibration, to ensure that the vibration of the fan winding machine does not affect its own accuracy and life, and does not vibrate and affect the quality of the coil, the adjacent equipment and buildings should not have a negative impact on the fan winding machine.

2. The table and foundation of the fan winding machine should have stability and durability, waterproof and anti-slip and the leaching of harmful objects, to ensure that no deformation or local sinkage is produced. When the fan winding machine is placed in an environment where it is likely to suffer from chemical liquids, oil or corrosion, the foundation should have a protective layer. For example, the surface of the foundation is coated with anti-acid, anti-oil cement paste sand, and set up drainage, liquid collection grooves.

3. The foundation of the large fan winding machine should be pre-pressurized before the installation of the machine. The mass of the pre-pressure is 1.25 times of the total mass of the fan winding machine and the total maximum mass of the customer’s workpiece. The pre-pressure can be made of steel, sand and small stones. The pre-pressure should be evenly pressed on the foundation to ensure even sinking of the foundation. Pre-pressure work should be carried out until the foundation no longer continue to sink.

4. Fan winding machine table and foundation must be compatible with the base of the model fan winding machine, and can ensure that the fan winding machine installed on it is solid and reliable, to ensure that there is a reliable grounding equipment around, to ensure that there is no large source of interference around.

5. The center of gravity of the fan winding machine and the total center of gravity of the table and foundation and the centripetal force of the foundation bottom surface seek to be located in the same vertical line.

자동 자기 코일 와인딩 머신

Fan winding machine with the use of the environment with the following design!

1, more intelligent servo drive system and sensing technology: servo drive system was first applied to precision CNC lathes, with the fan winding machine precision requirements continue to rise, the application of servo systems can improve the accuracy of the winding equipment spindle and line mechanism, improve the processing of the coil winding whole degree.

2, precision displacement drive mechanism: automatic fan winding machine equipment configuration there are many precision displacement parts, equipment in the process of use of these parts are in a state of wear, configuration of high-precision ball screw and guide greatly improve the precision of the fan winding machine displacement parts, extend the service life of these wear parts.

3, low energy consumption, low noise institutional configuration

왓츠앱/위챗: +86 13075286997

이메일: sales@vacuz.com