Winding machine manufacturer: the commissioning method of automatic winding machine

Winding machine manufacturers: automatic winding machine debugging methods

Automatic winding machine in the industrial processing industry is widely used because he can greatly reduce the time required for industrial production and at the same time can greatly improve the product information, and we know that the automatic winding machine not only has fine mechanical parts, but also equipped with a strong electrical control system. It integrates electrical control, sensing technology, mechanical transmission, pneumatic equipment and other components. Compared with some other electrical processing equipment, the debugging method is more complicated and fine. In the whole automatic winding equipment industry, Kunrong Machinery has accumulated the debugging methods of winding equipment for many years. Here to share with us some ways to help us in the debugging of automatic winding machine can be assisted.

The following debugging methods can be applied to the common winding processing technology of bobbin coils, mainly to explain the winding orientation, enameled wire standards and winding width of the three important winding parameters.

1. How to set the winding orientation

What is the winding orientation? In short, it is the starting point of the winding axis. This orientation is closely related to the head of the coil and the type of coil. It is usually possible to measure a specific value of the relevant starting position through the measurement function of the device control system. The operator is also able to use a fixed point as a reference point and use a ruler for practical measurement in order to perform manual measurement and pay attention to the direction of coil wrapping when setting this point.

2. Enameled wire standard setting

General enameled wire has different wire diameter, enameled wire standard setting is correct, will directly affect the role of the cable, the use of different materials enameled wire needs to use different wire diameter correction value, copper wire is not easy to thin, correction value increased by about 0.02, aluminum wire through the winding equipment and wire through the tension of the equipment is simple to stretch, correction value greater than 0.02-0.2.

3. The setting of the winding width

The understanding of the winding width is the distance from the beginning of the winding to the end of the winding, usually the value directly reflects the skeleton needs to surround, must be considered due to the slight deformation of the skeleton used and the impact on the width of the winding, a comprehensive measurement should be used to Z small value as the width of the winding.

The above approach is expected to bring us convenience and reduce unnecessary trouble in the practical operation of the automatic winding machine in practice.

왓츠앱/위챗: +86 13075286997

이메일: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="작은 가시성,중간 가시성,큰 가시성" class="" id=""][/fusion_form]