Many friends buy automatic winding machine equipment, but do not know how to go to the correct use, resulting in a variety of problems, then how to correctly use the motor stator winding machine equipment? What details and methods need to pay attention to? The following Vacuz to tell you about it!

To correctly use the motor stator winding machine equipment to ensure safe and efficient operation, you need to follow the following details and methods:

First, the preparatory work:

1. Determine the working mode of the winding machine, and select manual, automatic or electric mode as needed.

2. Prepare the appropriate molds according to the size and shape of the stator, and ensure that the polishing and precision meet the requirements.

3. Select appropriate wires and make sure that the size and type of wires match the requirements of the equipment.

4. Check the equipment and make sure that there is no problem with the controller, electrical device, wiring device and mold.

II. Safe operation:

1. Operators need to be trained and familiar with the structure, performance and basic operating procedures of the equipment.

2. Before operation, wear good labor protection products, such as gloves, protective glasses, etc., and take safety precautions.

3. Prohibit non-professional operators from approaching the equipment to ensure the safety of the operation area.

4. No-load test run should be carried out before starting the machine to check whether the equipment’s operating system, device and foot switch are sensitive and reliable.

III. Steps.

1. According to the stator winding diagram, prepare the corresponding winding program or import the existing program.

2. Manually adjust the equipment so that the wire nozzle and needle bar run normally and are positioned accurately to avoid collision or scratching with the stator seat.

3. Try to run with the line and observe whether the steps of winding, rod winding, arranging, shifting and cutting are correct. If there is any abnormality, adjust it in time.

4. After there is no problem, gradually increase the running speed to finish the winding work.

5. The wound coil should be carefully placed in the specified place to avoid damage.

IV. Precautions:

1. During operation, pay attention to whether the power supply voltage meets the requirements of the equipment, do not change the power supply at will.

2. Keep the equipment clean and hygienic to prevent impurities from entering the equipment and affecting its normal operation.

3. Pay attention to the environment temperature, do not let the equipment overheat, which will shorten its life.

4. Regularly check the vulnerable parts of the equipment, such as bearings, transmission system, etc., if any damage should be replaced in time.

5. In the process of use, if you encounter abnormal conditions, such as odor, smoke, etc., you should immediately stop the machine and check the cause of the malfunction.

V. Maintenance:

1. When leaving work, the equipment should be cleaned and maintained in time to keep it in good condition.

2. Carry out regular maintenance on the equipment, such as lubrication, fastening, etc., to ensure the normal operation of the equipment.

How to use the motor stator winding machine equipment correctly? What details and methods need to pay attention to? According to the above methods told by Vacuz, I believe it can help you!

El. paštas: sales@vacuz.com