Jak poprawić stabilność maszyny nawijającej?

All kinds of electric motors, fluorescent lamp ballasts, various sizes of transformers, televisions. Radio with mid-cycle, inductor coils, line output transformer (high-voltage package), electronic ignition, mosquito extinguisher on the high-voltage coil, speakers, headphones, microphone voice coil, a variety of welding machines, etc. can not be cited one by one, these inside the coil need to use a winding machine to wind. The textile industry uses cotton yarn, man-made fiber yarn, etc. to wind various kinds of yarns suitable for textile machines, and these need to use a winding machine to wind.

Temperatura otoczenia nie jest odpowiednia dla fabryki, zbyt niska lub zbyt wysoka temperatura jest zabójcą wszystkich produktów elektronicznych, powinien to być konsensus, więc w umieszczeniu warsztatu maszyny do nawijania najlepiej jest wyposażyć w pomocniczy sprzęt do regulacji temperatury. Jeśli chodzi o środowisko, to dobre środowisko fabryczne obejmuje temperaturę, temperaturę, ziemię, powietrze, zasilanie, przestrzeń, operatorów itp.

Environmental humidity is not appropriate, the winding machine is composed of many electronic components of integrated circuits, its insulation performance and environmental humidity has a lot to do with. Humidity is too large, easy to cause short circuit board and burn; humidity is too small, easy to generate static electricity, will also be part of the electronic components. Therefore, too much humidity, too little, will bring potential threats to the winding machine.

If the power supply system is unstable, the power supply voltage fluctuations, easy to blackout, the rapid development of industry and life, the demand for electricity is also increasing, many areas have a shortage of power supply, voltage instability, easy to blackout happens from time to time. Voltage instability and sudden power outages, resulting in frequent restarts of the system, electronic components may be damaged because of the impact of the current, so the stability of the working environment power supply is related to the normal work of the winding machine or not, you can use voltage stabilization power supply and UPS uninterruptible power supply for protection, specific equipment selection, depending on the size of the load power, the need to maintain the number of working hours to determine.

In addition, electrostatic protection issues require us to have a good instrument grounding on the winding machine. And then use 40X40X4 galvanized flat steel and grounding body reliable welding (each welding point also do careful anti-rust treatment), sub to the building for 25mm copper cable to the system ground terminal and winding machine grounding point. This can effectively reduce the harm caused by static electricity.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]