Commissioning method of automatic stator motor coil winding machine manufacturer

The following debugging methods can be applied to the common winding processing technology of bobbin coils. The three important winding parameters, namely winding orientation, enameled wire specification and winding width, are clarified first.

1. How to set the winding orientation of the automatic bobbin winding machine: In short, it is the starting point of the bobbin winding. This orientation is closely related to the head of the coil and the type of coil. The specific value of the relevant actually orientation can generally be measured by the measurement function of the machine control system. The operator can also use a fixed point as a reference point and use a ruler for practical measurements for manual measurement and keep an eye on the winding direction of the coil when setting this point.

2. Enameled wire specification setting

General enameled wire has different wire diameter, the enameled wire specification is set correctly, will directly affect the role of the cable, the use of different materials of enameled wire need to use different wire diameter correction value, copper wire is not easy to thin, correction value added about 0.02, aluminum wire through the winding equipment and wire through the tension of the equipment is easy to stretch, correction value greater than 0.02-0.2.

3. The setting of winding width

The winding width is the distance from the beginning of the winding to the end of the winding, generally the value directly reflects the skeleton needs to surround, it is necessary to consider the slight deformation of the skeleton used and the impact on the width of the winding, should use the general measurement method to Z small value as the winding width.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]