Common functions and coil settings of automatic coil stator motor winding machines

Coil winding machine to work properly requires processing materials, parameter settings, accessory functions and other aspects of cooperation, including the correct setting of parameters is particularly important, it is related to the coil winding machine in accordance with the requirements of the winding process processing coils and coil quality, many coil winding machine users there are blind settings, parameters set unreasonable, etc., this article from the common coil of the actual case to explain the coil This article explains the common coil winding machine from the actual cases of common functions of the editorial settings.

A. Common transformer coil settings

Common coil winding machine parameters are starting winding point, winding width, total number of turns, start winding jog, stop jogging, etc., in the coil winding machine manual for these functions have detailed instructions and application examples for user reference (this article will not explain), according to the characteristics of the transformer coil winding machine parameters should pay attention to the following issues, first of all, when setting the starting point position, pay attention to the coil tap position, should not be Secondly, according to the material of the enameled wire to choose a reasonable speed, especially when using flat wire winding axis speed can not be too fast, too high a speed can easily lead to a loss of step between the axis and the spindle.

Second, the common motor stator coil setting

Motor stator coils are characterized by small width and large diameter, generally using single-strand or multi-strand enameled wire winding, winding requires spindle positioning across the slot, in the parameter settings need to pay attention to when using multi-strand enameled wire and winding the wire diameter parameters need to be added to adjust the value should not be too small, coil winding machine parking jogging number of turns according to the speed and wire diameter settings.

Third, the setting of common ballast coils

Ballast coils are small coils, these coils are usually wound enameled wire directly around the skeleton, parameter settings need to be adjusted according to the size of the skeleton, it should be noted that the ballast coil skeleton is generally made of plastic, due to the characteristics of the material there will be a certain amount of skeleton deformation, set the width should be added to a certain amount of deformation correction value.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]