Vacuz’s large automatic winding machines are generally designed with a base that is fixed directly to the ground. The high quality cast iron base is designed to ensure that the centering force of the winding machine is satisfied, to improve the stability of the winding machine and to reduce the oscillation of the winding machine during operation. When the winding machine is installed in the right way on the right foundation, it can make the winding machine work at high speed without due deformation, wear and tear and oscillation, thus maintaining the rigidity of the winding machine body and coil quality for a long time.

Small and medium-sized winding machine, the need for a relatively solid table, the necessary table needs to be installed with appropriate shock absorbing devices, if the number of winding machine device pivot points and scattered inappropriate orientation or fixed method is not reasonable, it will affect the function and longevity of the machine. For enterprises using winding machine, the requirements of the place is to build a suitable foundation or workbench for winding equipment work and placement, in order to satisfy the requirements of the winding machine on the environment of the place, the specific requirements are generally the following: 1.

1. winding machine workbench and foundation must be compatible with the base of the type of winding machine, and can ensure that the installation of the winding machine on its strong and reliable, ensure that there is a reliable grounding around the equipment, to ensure that there is no large source of interference around.

2. Winding machine table and foundation should meet the strength and stiffness to prevent the winding machine high-speed dynamic oscillation, to ensure that the oscillation of the winding machine does not affect its own accuracy and longevity, and does not vibrate and affect the quality of the coil, the adjacent equipment and buildings should not have a negative impact on the winding machine.

3. The table and foundation of the winding machine should have stability and durability, waterproof and anti-slip and harmful objects of corrosion, to ensure that no deformation or partial sinking. When the winding machine is placed in an environment where it is likely to suffer from chemical liquids, oil or corrosion, the foundation should be protected with a protective layer. For example, the surface of the foundation is coated with acid-proof, oil-proof cement paste sand, and set up drainage and liquid collection grooves.

4. . The center of gravity of the winding machine and the table and the total center of gravity of the foundation and the centripetal force of the foundation bottom surface seek to be located in the same vertical line.

5. large winding machine foundation should be pre-pressure before the machine device. Pre-pressure of the mass of the total mass of the winding machine and the maximum mass of the customer’s workpiece sum of 1.25 times. The pre-pressure can be made of steel, sand and small stones. The pre-pressure should be evenly pressed on the foundation to ensure even sinking of the foundation. Pre-pressing should be done until the foundation does not continue to sink. Many customers do not realize how much the environment in which the winding machine is used affects its function. The layout of the winding machine should facilitate the process flow and regulate the transportation and storage of raw materials and semi-finished products. The outstanding and reasonable working environment of the equipment is not only beneficial to ensure the quality of the coils, but also to the maintenance of the winding machine.

Vacuz produkuje i sprzedaje automatyczną maszynę do nawijania, precyzyjną maszynę do nawijania, maszynę do nawijania cewek indukcyjnych i inny sprzęt, zapraszamy do konsultacji i zamówienia.