The reason why automatic winding machine has more functions than ordinary winding machine

Transformer in the production process to determine the frequent start-up of equipment and constant torque requirements, the need to set the general parameters of the transformer winding machine for: slow function setting is also commonly used a parameter it is mainly to control the start and stop the slow operation of the equipment to play a soft start and stop buffer role, the correct setting allows the operator to start the winding machine has an adaptive process of tension when the equipment stops when the buffer can be stopped more accurately.

The number of turns is the number of turns the equipment needs to run according to the production process, divided into the total number of turns and the number of turns corresponding to each step. It should be noted when setting that the total number of turns is equal to the sum of the number of turns for each step. Rotation speed is used to control the operating speed of the equipment, speed settings need to be combined with the production process and the actual working conditions of the winding, too fast and too slow is not conducive to coil molding, running too fast will give the operator’s control, increase the vibration and noise of the equipment, the speed of the equipment is too low will greatly affect the production capacity and efficiency of the equipment, but also affects the equipment torque output of the spindle.

With the general progress of science and technology, the use of automatic winding machine environment requirements are not high, although so, but because the automatic winding machine contains a large number of electronic components they are afraid of direct sunlight is also afraid of moisture and dust, vibration and so on, these will make the electronic components corrosion and deterioration, or short-circuiting between the components caused by the winding machine is not caused by the normal of these general in the installation of the machine should be paid attention to.

For users, they should pay attention to the protection of the surrounding environment. For example, on rainy days, they should pay attention not to bring umbrellas to the production site, and keep the production site clean and tidy. Stepping function is used to control the sequence of equipment operation, generally based on the production process to decide, a coil forming winding is not only enameled wire winding, there are many other steps such as wrapping the paper layer, wrapping the insulating cloth, etc., so the correct setting of the stepping function will effectively play the efficiency of the equipment.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]