How to maintain the automatic winding machine equipment

Inspeção diária: A manutenção diária de proteção da bobinadeira CNC deve ser realizada após oito horas de operação. No final do dia, desligue a energia do computador e da máquina, aspire a poeira na parte traseira da máquina e limpe as manchas de poeira na parte externa do equipamento com um pano branco. Se o ambiente for ruim, as operações de manutenção deverão ser realizadas com mais frequência. Observação: não use solventes orgânicos para limpar, pois isso pode danificar a pintura da superfície do equipamento.

Weekly inspection: weekly protective maintenance should be performed after every 40 operating hours, if the environment is poor, the cycle should be shortened pneumatic lubrication device. Note: The lubricant and oil used must be of good quality. Otherwise, it will increase the surface friction of the screw or guide, which will shorten the service life of the magnetic ring winding machine screw, affect the accurate positioning of the machine, etc. Warning: Do not use phosphoric acid and hydrocarbon oxide synthetics in the lubrication device or in the air circuit of the plant. Check the equipment in the lubrication unit and add 100CKR lubricant if needed.

Monthly inspection: monthly protective maintenance should be performed every 200 operating hours, if the environment is poor, the cycle should be shortened pneumatic lubrication device. Check the flow of pneumatic lubricating oil by observing the stranding machine hole, the flow rate should be divided into 3-5 drops in five minutes, you can adjust the flow rate by turning the groove screw at the top of the lubricating device to the back of the funnel, it should be adjusted to 1/4-1/2 open at the beginning, the counterclockwise screw will make the flow rate of lubricating oil increase/decrease.

WhatsApp/Wechat: +86 13075286997

E-mail: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="small-visibility,medium-visibility,large-visibility" class="" id=""][/fusion_form]