Common faults of automatic stator motor coil winding machine

Automatic winding machine can wind various sizes of solenoid coils, which generally have solenoid coils around and certain solenoid coils. When setting, there will be some differences for different electromagnetic coils. Be sure to set the main parameters appropriately, adjust the winding support force and installation method, and then you can wind stronger artwork and better looking solenoid coil products. In addition, automatic winding machine may encounter various problems throughout the operation process, the most common key conditions are the following
The solenoid is not winding properly. When this occurs, it is necessary to analyze whether this problem occurs during normal settling or after disassembly and adjustment of the commodity. If the former, most cases are due to hardware configuration challenges, if the latter, it is usually a setup issue. Hardware configuration problems can be caused by loose fixture tools, loose fastening screws in the wiring mechanism, and inadequate wet natural environment in the wiring mechanism, resulting in common wiring faults when the servo motor is running under load.

Inaccurate parts of the spindle bearing block, which is also common in fully automatic winding machines. This condition is mainly caused by difficult problems with the braking system. Such as loose brake pad, or gray and black brake pad wear. In addition, it has a lot to do with the setting of the brake system time. If the setting time is not enough, it will lead to spindle bearing positioning error. To solve this problem, the brake pad must be removed or the brake system must be readjusted.

The inaccuracy of the solenoid coil of the winding line or the total error of the winding machine is mainly due to the difficulty of the inductor or control board, so that the winding machine does not work properly. Therefore, it is necessary for the manufacturer of the automatic winding machine to repair it. The automatic winding machine will have abnormal sounds throughout its operation, and the difference in noise is used to distinguish whether the winding machine has abnormal problems. Of course, this must be identified by technical professionals.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="small-visibility,medium-visibility,large-visibility" class="" id=""][/fusion_form]