Coil winding machine to work properly need to process materials, parameter settings, accessory functions and other aspects of cooperation, in which the correct setting of the parameters is particularly important, it is related to the coil winding machine in accordance with the requirements of the winding process coil and the quality of how the coil, many coil winding machine users exist in the blind setting, parameter settings are not reasonable and so on, this paper explains the coil from the actual case of common coil This article explains the editing and setting mode of common functions of coil winding machine from the actual cases of common coils.

Четыре станции автоматический BLDC бесщеточный внутренний двигатель статор катушка намотки иглы машина

I. Setting of common transformer coils

Common coil winding machine parameters are winding point, winding width, total number of turns, start winding jogging, stop jogging, etc., in the coil winding machine manual for these functions have a detailed description and application examples for users to refer to (this article will not be explained), according to the characteristics of the transformer coil set the parameters of the coil winding machine should pay attention to the following issues, first of all, the starting point is set to pay attention to the position of the coil tapping position should not be set on the same side of the coil; set in the same side of the coil; the coil winding machine parameters should not be set on the same side of the coil; the coil winding machine parameters should not be set on the same side of the coil. Set on the same side of the coil; secondly, according to the material of the enameled wire to choose a reasonable speed, especially when the use of flat wire winding spool speed can not be too fast, the speed is too high easily lead to the row of spools and the spindle out of step between the spindle.

II. Setting of common motor stator coil

Motor stator coil is characterized by a small width and large diameter, generally used single-strand or multi-strand enameled wire winding, winding the spindle needs to be positioned across the slot in the parameter settings need to pay attention to when the use of multi-stranded enameled wire winding parameters need to be added to the adjusted value should not be too small, the number of coil winding machine stopping jogging laps according to the speed and wire diameter settings.

EPC EFD трансформатор шпуля катушки Vacuz автоматическая намотка ленты корпус машина производить

Setting of common ballast coils

Ballast coil belongs to small coils, this type of coil in the winding is usually the enameled wire directly wound in the skeleton, parameter setting needs to be adjusted according to the size of the skeleton, it should be noted that the ballast coil skeleton is usually made of plastic material, due to the material characteristics there will be a certain amount of deformation of the skeleton, set the width of the deformation should be added to the corrected value of a certain amount of deformation.

WhatsApp/Wechat: +86 13075286997

Электронная почта: sales@vacuz.com