No matter what the machine, the use of a long time more or less have some minor problems, some are the machine itself, some are caused by operational errors, motor stator winding machine is also the case, after the equipment problems, do not force to run, you need to troubleshoot, find out the cause of the failure, and then solve, then the stator winding machine common fault solution what is it? Hope it can help everyone!

1. Whole machine reset restart

This situation is mostly operational problems, such as crash, sudden power failure, etc., resulting in unknown errors in the winding machine, you can use the reset approach, restart to see if there are still problems, pay attention to check whether the voltage is unstable, the system will be initialized to ensure that the winding machine runs normally until.

2. Check the adjustable parts

Common problems, such as broken wire, wounded wire, jumping wire, etc., most of the machine parts or parameters are not adjusted in place, pay attention to check whether the tensioner setting is reasonable, the use of enameled wire is correct, check whether the mold and skeleton is loose, whether the line is broken, induction is normal.

3. Spare parts replacement

Sometimes, the motor stator winding machine failure, there may be a small part of the problem, in order to quickly solve the problem, you can replace the spare parts, and then repair the previous, so as not to delay the production time, is a more feasible way.

4. Program setting error

Reasonable procedures to ensure the normal operation of the equipment, if the customer adjusts certain parameters, it is easy to have problems, some customers in order to yield, adjust the speed, reached a certain limit, there may be errors, so the program settings are very important, must understand, according to the correct instructions for operation.

5. Environmental interference

Environmental conditions can also affect the stator winding machine, such as the installation of the ground is not smooth, the ambient temperature, there are sources of vibration, etc., if there are these situations, should be resolved in a timely manner to avoid damage to the winding machine.

The above is the stator winding machine common troubleshooting methods, master these basic knowledge, in order to better go to the field production, the machine can also play an efficient role.

WhatsApp/Wechat: +86 13075286997

E-mail: sales@vacuz.com