Small fish line winding machine_Automatic winding machine series_What is the installation method about fan winding machine, winding machine manufacturers take you to understand!

Fan winding machine installation methods are as follows.

1. Fan winding machine table and foundation should have sufficient strength and stiffness to avoid fan winding machine at high speed when moving violent vibration, to ensure that the vibration of the fan winding machine does not affect its own accuracy and life, and does not vibrate and affect the quality of the coil, the adjacent equipment and buildings should not have a negative impact on the fan winding machine.

2. The table and foundation of the fan winding machine should have stability and durability, waterproof and anti-slip and the leaching of harmful objects, to ensure that no deformation or local sinkage is produced. When the fan winding machine is placed in an environment where it is likely to suffer from chemical liquids, oil or corrosion, the foundation should have a protective layer. For example, the surface of the foundation is coated with acid-proof, oil-proof cement paste sand, and set up drainage and liquid collection grooves.

Winding machine manufacturers

Automatisk lindningsmaskin för magnetiska spolar

3. The foundation of the large fan winding machine should be pre-pressurized before the installation of the machine. Pre-pressure of the mass of the fan winding machine and the customer workpiece larger mass of the total sum of 1.25 times. The pre-pressure can be made of steel, sand and small stones. The pre-pressure should be evenly pressed on the foundation to ensure even sinking of the foundation. Pre-pressure work should be carried out until the foundation no longer continue to sink.

4. Fan winding machine table and foundation need to be compatible with the base of the model fan winding machine, and can ensure that the fan winding machine installed on it is solid and reliable, to ensure that there is a reliable grounding equipment around, to ensure that there is no large source of interference around.

5. The center of gravity of the fan winding machine and the total center of gravity of the workbench and foundation and the centripetal force of the foundation bottom surface should be located in the same vertical line.

WhatsApp/Wechat: +86 13075286997

E-post: sales@vacuz.com