The automatic winding machine has a lot of unique features compared with the ordinary semi-automatic winding machine, no matter from the range of counting, counting accuracy, specific operation performance, there are very many unique features.
The automatic winding machine of CNC machine tools is a combination of two parts: speed control and mechanical and electrical installation and control. The speed control part is mainly composed of controller, winding motor, speed control circuit, reed sensor, counters, and input circuit. The electromechanical installation control-part is composed of electromechanical installation control, line structure and jumping gear mechanism.

This part mainly uses thyristor speed control to control the motor of the winding machine, and then sends the data signal of the winding motor’s lap number to the binary additive counter according to the reed sensor. When the number of laps of the counter is the same as the input number of laps, the data signal is sent to the controller by the conforming circuit to operate the electromechanical I-range control circuit.

Motorcycle magnetic coil winding machine

In the automatic winding machine configuration parts of the transmission line over the wire structure is immediately and wire and cable wire direct contact with the structural components, the structure of the parts and material design selection will directly affect the damage to the wire and cable and the stability of the alignment, not the same wire and cable winding production process configured wire over the wire structure material is different.

As we all know, the winding machine is a precision manufacturing machinery and equipment, widely used in transformer manufacturers. There are strict requirements for the working environment and production process. The operation of 1 winding mentioned earlier has a very significant impact on the output power of the motor. At this stage, there are two types of winding machine controllers in common use: one is a general-purpose controller supplied by an integrated supplier, and the other is a controller developed by the manufacturer. The common problem of the controller is the strong and weak power control parts and buttons. This problem can not be handled by the customer, must be informed to the manufacturer to overhaul. Inverter problems are also more common, you can check the inverter display operating interface to identify the problem, motor problems customers in the use of the operation process should pay special attention to the motor is not normal noise, temperature is not normal, suspend the use of machinery and equipment during the operation of the load operation; brake is a consumable accessories, in the winding machine should be adjusted immediately after a longer period of time, if necessary, replace.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com