The rise of brushless motor automatic production line, to solve the brushless motor production speed is slow, the quality of consistency is not good amount of problems in many motor manufacturers have been widely used, greatly improving the production efficiency, but the brushless motor automatic production line precautions and safety regulations should also be noted, Vacuz give you an introduction to it!

Motor Üretim Hattı

1. The whole production line should be checked for safety before operation, and it can be put into use only after the empty car runs normally.

2. It is strictly prohibited to run with a fault, do not use at will to prevent accidents. In case of failure, maintenance should be stopped, and no repair, maintenance, lubrication and fastening work should be carried out during operation.

3. Safety devices must be used correctly according to regulations, and disassembly is not allowed. Tools, fixtures and processing parts must be firmly installed and not loose.

4. When the brushless motor automatic production line is running, the operator must not leave his post, so as to prevent problems from being left unattended. It is strictly forbidden for the operator to adjust, measure the parts, lubricate or clean the debris by hand.

5. When the operator finds abnormal sound or other abnormal situation, he/she should turn off the power and check and feedback to the relevant responsible personnel, and shall not carry out maintenance operation without authorization. Electrical equipment must be installed and serviced by an electrician, so as to do the maintenance without electricity, maintain a good grounding to prevent leakage.

6. In case of unstable voltage, the operation of brushless motor automatic production line should be stopped, the power supply should be cut off in time, and corresponding measures should be taken to solve the problem. In the case of power failure during the operation of the assembly line, it is necessary to turn off the switch immediately to prevent the equipment from running in an uncontrolled state after the call comes back.

7. After the work is finished, the power supply should be cut off, tools and workpieces should be stripped from the working position, and the workplace, parts, fixtures, etc. should be neatly organized and clean and hygienic brushless motor automatic production line.

8. The operation site of the brushless motor automatic production line should have a good environment, i.e., the lighting should be appropriate, the noise and vibration should be small, and the parts, fixtures, etc. should be neatly placed. The brushless motor automatic production line should formulate safety operation regulations and systems for inspection, lubrication and maintenance according to its performance and operation sequence, so that the operators can abide by them.

BLDC Armatür Rotor Bobin Üretim Hattı

Brushless motor automatic production line precautions and safety regulations, Vacuz above has made a simple explanation, I hope that this knowledge can help you, strictly in accordance with the requirements of the operation, to avoid all kinds of accidents!

WhatsApp/Wechat: +86 13075286997

E-posta: sales@vacuz.com