Factors that determine the life span of automatic hollow coil winding machines

Vacuz Machinery is here to learn more about the factors that determine the life span of a hollow coil winding machine!

Hollow coil winding machine is a device that winds linear objects onto specific workpieces. Hollow coil winding machine includes the head, fixture, frame and other three main components, and not the same flat winding machine, the same in the replacement of different specifications of the storage ring can be applied to different wire diameter, winding products of different internal diameters, while the fixture also has the corresponding clamping range.

The performance of the hollow coil winding machine is related to its efficiency, the process can be solved, the scrap rate, some characteristics of the hollow coil winding machine start will also affect the operation of the machine can be long-term normal and reliable:

1, a smooth start, hollow coil winding machine single weight up to 800KG, can effectively ensure the long-term stable operation of the machine.

2, the starting torque must be large enough to make the hollow coil winding machine to overcome the torque resistance and start.

3, the starting current should be as small as possible, because the hollow coil winding machine electronics, circuit boards, etc. are relatively fragile.

4. The starting equipment should be as simple, economical and easy to operate as possible. After the winding machine is connected to the hollow coil power supply, the machine can be turned on by simply clicking the green button on the PLC screen.

Hollow coil winding machine starting method can be divided into two kinds of direct start and voltage reduction start. Direct start is to start the hollow coil winding machine directly with rated voltage, also called full voltage start. This starting method is mainly used for large grid capacity, and the starting current of hollow coil winding machine will not cause significant voltage drop to the grid. Generally, the hollow coil winding machine with power below 1Okw uses full voltage starting. When the power is larger and the power supply capacity is not allowed, a reduced voltage start should be used. The buck starting method can be divided into Y-A starting method, compensator buck starting method and topo triangle buck starting method. The specific method used depends on the nameplate of the motor and the load of the motor.

WhatsApp/Wechat: +86 13075286997

E-posta: sales@vacuz.com [fusion_form form_post_id="431″ margin_top="" margin_right="" margin_bottom="" margin_left="" hide_on_mobile="small-visibility,medium-visibility,large-visibility" class="" id=""][/fusion_form]