For example, tensioners are provided with a wire diameter of 0.06 to 0.13 mm. The tensioner is provided with two adjusting nuts, an adjusting nut 1 and an adjusting nut 2. The adjusting nut 1 is labeled with a scale from 0 to 5 and has a tension range of 20 to 130 grams, wherein each scale has a tension value of about 26 grams (reference value). When the nut 1 is twisted to the right, the tension value will become larger; conversely, if the nut 1 is twisted to the left, the tension value will become smaller.

Motor Stator Trafosu Bobin Sarma Makinesi Parçaları OLED Ekranlı Elektronik Motor Tel Sarıcı Servo Gergi

Adjustment nut 2 is labeled with a 0~5-step scale to control the bending angle of the rod. The angle adjustment range is approximately 0~30°. For the same tension, the larger the reading of the adjusting nut 2 scale, the smaller the bending angle; the smaller the reading, the larger the bending angle.

In the case of normal winding, it is best to pass the line on the fishing rod and the line on the oil cup.

Instructions for adjusting the tensioner of the automatic bobbin winder:

1.After hanging the line, check the tension first before you start winding. You can check for elasticity by pressing down on the line with your finger. If the tension is too big, the frequency of disconnection of the winding will increase. If the tension is too small, it will directly affect the whole column. Degree. Adjust the tension as needed during the winding process. Tension is higher when the wire is not pulled apart and the tonearm is better aligned.

2. if the wire is loose on the peg, this can be fixed by increasing the tension if the peg is in the correct position.

Tel Gerdirici

3. If the coil resistance, alignment and total number of turns are normal, the coil length will have a small margin of error (e.g. 0.01mm). If the coil length is greater than the actual requirement, the tension can be adjusted slightly to increase the tension; if the coil length is less than the actual requirement, the tension can be reduced by a small amount.

WhatsApp/Wechat: +86 13075286997

E-posta: sales@vacuz.com