Transformer winding machine is better than ordinary winding machine effect is why?

The winding machine can be divided into simple type, semi-automatic type and fully automatic type according to the degree of automation. The electronic control methods are CNC type microcomputer single-chip and IBM computer control. According to the installation method, they are classified as desktop type and floor type machines. As the production process of transformers determines the frequent start-up and constant torque requirements of the equipment, the general transformer winding machine requires the following parameters to be set.

Slow function setting is also a common parameter it is mainly to control the equipment start and stop when the slow speed operation, to play a soft start and parking buffer role, the correct setting allows the operator to start the winding machine when there is a process to adapt to the tension, when the equipment stops with a buffer can be more accurate parking. The number of laps setting is the number of laps the equipment needs to run according to the production process, it is divided into the total number of laps and the number of laps corresponding to each step, the setting is to pay attention to the total number of laps equal to the sum of the number of laps in each step.

The speed of operation is used to control the speed of the equipment, the speed setting needs to be combined with the production process and the actual working conditions of the winding to decide, too fast and too slow are not conducive to coil forming, fast operation will not be conducive to the control of the operator, increasing the vibration and noise of the equipment, too low speed operation will largely affect the capacity and efficiency of the equipment, but also affect the torque output of the equipment spindle.

With the progress of science and technology in general, the use of automatic winding machine environment does not have any harsh requirements, that said, but because the automatic winding machine contains a large number of electronic components they are most afraid of direct sunlight, moisture and dust, vibration, etc. These can make the electronic components are corroded bad, or cause short circuit between the components caused by the winding machine does not run properly these general in the installation of the machine should be noted.

For the user is mainly to pay attention to the protection of the surrounding environment, such as rainy days should be careful not to bring umbrellas to the production site, to keep the production site tidy. The step-by-step function is used to control the sequence of equipment operation, it is generally based on the production process to decide, a coil forming winding is not only the winding of enameled wire, there are many other steps such as wrapping paper layer, wrapping insulation cloth, etc., so the correct setting of the step-by-step function will effectively play the efficiency of the equipment.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]