Stator winding machine winding thin wire and thick wire what is the difference? What details should I pay attention to?

Brushless motor production can not be separated from the professional winding machine equipment, according to the stator products, enameled wire diameter also varies, some wire diameter is very fine, less than 0.1mm, some wire diameter is very thick, more than 1.0mm, so what is the difference between the specific winding fine wire and thick wire? Vacuz give you an introduction to it!

1. Different equipment, like small pumps, high-speed air cylinder, electric toothbrush and other tiny motor stator products, wire diameter are relatively thin, 0.1mm or so, generally more than four or six stations equipment; wire diameter thicker power tools, garden tools, or stator a little larger servo motors, gates, elevator doors, winches and other motor stator, more double or four stations equipment.

2. Different speed, the finer the wire diameter, the more turns, the required winding speed should be faster; for thick wire, many times as long as you can wind in on it, not so much for speed requirements.

Attention to detail.

1. When winding thick wire to pay attention to the injury problem, the wire diameter is thick, a bend, or too fast, a little carelessness is easy to hurt the line, so the speed should be as slow as possible, the injury line to detect and debug in time.

2. winding thin wire to pay attention to the problem of wire breakage, wire diameter, coupled with the speed, it is easy to break the problem, the need for professional debugger debugging, including tensioner, servo drive controller are required to be more accurate.

Stator winding machine winding thin wire and thick wire what is the difference? To pay attention to what details, the above has been briefly introduced, I hope it can help you!

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]